2016-02-24_REVISION - C1996084 - Laserfiche WebLink

Home Browse Search

PART I Page 5 of 31 Permit No.: CO0048988 g. Salt Storage Piles or Piles Containing Salt The permittee must enclose or cover storage piles of salt, or piles containing salt, used for deicing or other commercial or industrial purposes, including maintenance of paved surfaces, and implement appropriate measures to minimize exposure resulting from adding to or removing materials from the pile. h. Employee Training The permittee must develop and implement a training program for employees. Training must be conducted at least annually, and must address the following, as applicable to the trainee's activities: the site-specific control measures used to achieve the permit effluent limits, components and goals of the SWMP, monitoring and inspection procedures, and other applicable requirements of the permit. At a minimum, the following individuals must be trained: i. Employee(s) overseeing implementation of, revising, and amending the SWMP. ii. Employee(s) performing installation, inspection, maintenance, and repair of control measures. iii. Employee(s) who work in areas of industrial activity subject to this permit. iv. Employee(s) who conduct stormwater discharge monitoring, if required by this permit. i. Waste, Garbage and Floatable Debris The permittee must minimize the discharge of waste, garbage, and floatable debris from the site by keeping exposed areas free of such materials or by intercepting them before they are discharged. j. Dust Generation and Vehicle Tracking of Industrial Materials. The permittee must minimize generation of dust and off-site tracking of raw, final, or waste materials. D. CONTROL MEASURES All control measures used by the permittee to meet the effluent limitations contained in this permit must be selected, designed, installed, implemented, and maintained in accordance with good engineering hydrologic and pollution control, and the manufacturer's specifications, when applicable. 1. Installation and implementation specifications Installation and implementation specifications for each control measure type used by the permittee to meet the effluent limitations contained in this permit must be retained with the SWMP (see STORMWATER MANAGEMENT PLAN section). 2. Maintenance of Control Measures and Associated Documentation a. The permittee must maintain all control measures used to achieve the effluent limits required by this permit in effective operating condition. For this permit, maintenance includes preventative and routine maintenance, modification, repair, replacement, or installation of new control measures. Observations resulting in maintenance activities can be made during a site inspection, or during general observations of site conditions. b. Corrective actions associated with maintaining control measures must be conducted with due diligence, as soon as possible after the need is discovered, to achieve the effluent limits required by this permit. The permittee must implement interim control measures to achieve the effluent limits required by this permit while performing maintenance of the primary control measure. c. The permittee shall document corrective actions associated with maintaining control measures, in accordance with the CORRECTIVE ACTIONS section of this permit, and shall revise the facility SWMP to reflect replacement or installation of new control measures in accordance with the STORMWATER MANAGEMENT PLAN section requirements.