Laserfiche WebLink
6.3.1 EXHIBIT A - Legal Description and Location Map <br />(1) The legal description must identify the affected land, specify affected areas <br />and be adequate to field locate the property. Description shall be by (A) <br />township, range, and section, to at least the nearest quarter quarter section, <br />and (B), location of the main entrance to the mine site reported as latitude and <br />longitude, or the Universal Transverse Mercator (UTM) Grid as determined from <br />a USGS topographic map. A metes and bounds survey description is acceptable <br />in lieu of township, range, and section. Where available, the street address or <br />lot number(s) shall be given. This information may be available from the County <br />Assessor's office or U.S. Geological Survey (USGS) maps. <br />From the San Miguel County Plat Book: <br />PARCEL B DEEP CREEK PLACER NO. 16025 ACC TO MAP REC 07 06 98 IN PLAT BK 1 <br />PG 2397 49.29 AC MOL <br />Permitted Area: All that part and portion of the Deep Creek Placer (which includes Parcels A & <br />B), U.S. Survey No. 16025, being a patented placer mining claim situated in SW '/4 , Section 25, <br />and the SE 1/4 , Section 26, Township 43 North, Range 10 West, N.M.P.M. which lies north and <br />west of a line described as beginning at a point on the Southwesterly boundary line of said Deep <br />Creek Placer which point is N 49 "30 ` W, 525 feet from Corner No. 1 (being the Southernmost <br />corner) of said Deep Creek Placer, thence N 59 042.8' E, 1350 feet, more or less, to the <br />Northerly boundary line of said Deep Creek Place. <br />(2) The main entrance to the mine site shall be located based on a USGS <br />topographic map showing latitude and longitude or Universal Transverse <br />Mercator (UTM). The operator will need to specify coordinates of latitude and <br />longitude in degrees, minutes and seconds or in decimal degrees to an <br />accuracy of at least five (5) decimal places (e.g., latitude 37.12345 N, longitude <br />104.45678 W). For UTM, the operator will need to specify North American <br />Datum (NAD) 1927, NAD 1983, or WGS 84, and the applicable zone, measured <br />in meters. <br />Main entrance is designated by blue star on map (Fig. 1). <br />Latitude: 37.95830. Longitude: -107.93333. <br />(3) <br />A map showing information sufficient to determine the location of the affected <br />land on the ground and existing and proposed roads or access routes to be <br />used in connection with the mining operation. Names of all immediately adjacent <br />surface owners of record shall also be shown. The operation location map <br />shall be a standard 1:24,000 scale U.S. Geological Survey map. The location <br />of the proposed operation shall be shown and labeled with the mine site name. <br />Image of original Permitted Boundary (Fig. 1). Description above relates to area bounded by <br />points #1 - #8. Permitted area is a portion of larger "Deep Creek Placer." (NOTE: The yellow <br />1 <br />