Laserfiche WebLink
ACZ Laboratories, Inc. <br />2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334-5493 <br />Golder Associates <br />Inorganic Extended <br />Qualifier Report <br />ACZ Project ID: L27730 <br />ACZ ID WORKNUM PARAMETER <br />METHOD <br />QUAL DESCRIPTION <br />L27730-01 WG394500 Chloride <br />WG394243 Total Alkalinity <br />L27730-02 WG394500 Chloride <br />WG394243 Total Alkalinity <br />L27730-03 WG394500 Chloride <br />L27730-04 WG394500 Chloride <br />Sulfate <br />L27730-05 WG394500 Chloride <br />L27730-08 WG394500 Chloride <br />Sulfate <br />L27730-07 WG394500 Chloride <br />Sulfate <br />L27730-08 WG394500 Chloride <br />Sulfate <br />L27730-09 WG394500 Chloride <br />Sulfate <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />SM2320B - Titration <br />M300.0 - Ion Chromatography <br />SM2320B - Titration <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />REPAD.15.06.05.01 <br />L27730-1511231527 Page 15 of 20 <br />