Laserfiche WebLink
Site 01 <br />This subsidence area consisted of a crack and subsidence in the soil surface of less than 100 ft2. <br />The hole was filled in with large rocks on October 30, 2014 and then filled with soil collected <br />from a nearby road cut. After the rocks were covered with soil, the area was seeded with the <br />seed mix (Table 2). Seed was raked into soil, tamped, and then covered with nearby grass mulch <br />and pine sticks to help hold mulch in place. This work was finished on December 4, 2014. <br />Figure 2a and 2b. <br />2014. <br />Photographs of area before and after repair was accomplished on October 30, <br />Site 02 <br />This subsidence area was on a steep east -facing slope and consisted of holes and cracks less than <br />100 ft=. The holes and cracks were filled with rock and gravel from nearby and soils collected <br />from the base of a pine tree that had recently fallen over. The soils were then seeded and tamped <br />and then some grass mulch and leaves from nearby were applied to the reseeded soil. The seed <br />mix is listed in Table 2. <br />3 <br />