Laserfiche WebLink
Exhibit A — Legal Description <br />6.4.1 EXHIBIT A - Legal Description <br />1) The legal description must identify the affected land, specify affected areas and be <br />adequate to field locate the property. Description shall be by (a), township, range, and <br />section, to at least the nearest quarter -quarter section and (b), location of the main <br />entrance to the site reported as latitude and longitude, or the Universal Transverse <br />Mercator (UTM) Grid as determined from a USGS topographic map. A metes and <br />bounds survey description is acceptable in lieu of township, range, and section. Where <br />available, the street address or lot number(s) shall be given. This information may be <br />available from the County Assessor's office or U.S. Geological Survey (USGS) maps. <br />The legal description for the property boundary and permit area is detailed on the <br />included map in conformance with Rule 1.10.1(1). Existing residential property is <br />excluded from the permit boundary. The property boundary comprises 156.78± <br />acres. <br />2) The main entrance to the mine site shall be located based on a USGS topographic <br />map showing latitude and longitude or Universal Transverse Mercator (UTM). The <br />operator will need to specify coordinates of latitude and longitude in degrees, minutes <br />and seconds or in decimal degrees to an accuracy of at least five (5) decimal places <br />e.g., latitude 37.12345 N, longitude 104.45678 W). For UTM, the operator will need to <br />specify North American Datum (NAD) 1927, NAD 1983, or WGS 84, and the applicable <br />zone, measured in meters. <br />The main entrance is identified as `Proposed Access': (latitude 40.18956 North, <br />104.89517 East) as shown near the Northeast corner of the permit/property <br />boundary. <br />Varra Companies, Inc. OMLR 112 Permit Application 1 <br />Parcel 122 — Resource Development Project 1 July 2015