Laserfiche WebLink
L <br />ADZ Laboratories, Inc. <br />2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334-5493 <br />Golder Associates <br />L24573-01 WG384463 Chloride <br />L24573-02 WG384463 Chloride <br />Sulfate <br />I <br />L24573-03 WG384463 Chloride <br />' Sulfate <br />L24573-04 WG384463 Chloride <br />Sulfate <br />L24573-05 WG384463 Chloride <br />' L24573-06 WG384463 Chloride <br />Sulfate <br />L24573-07 WG384463 Chloride <br />' <br />Sulfate <br />L24573-08 WG384463 Chloride <br />' <br />L24573-09 WG384463 Chloride <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 Ox MDL). <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 O MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />REPAD.15.06.05.01 <br />M300.0 - Ion Chromatography <br />L24573-1506081348 <br />ACZ Project ID: L24573 <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 Ox MDL). <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 O MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 Ox MDL). <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 1 Ox MDL). <br />M300.0 - Ion Chromatography <br />DC Sample required dilution. Non -target analyte exceeded <br />calibration range. <br />M300.0 - Ion Chromatography <br />RA Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />Page 17 of 21 <br />