Laserfiche WebLink
area was spread out over the working bench with a D9 dozer. The accumulated material is <br />approximately 3-4 inches off the top of the open cut of the mining area. For example: the volume of <br />overburden in the active north cut area is (79,174 sf) X (4 inches) = 26,391 cf or 977 cy. The same D9 <br />dozer is used to spread the overburden material across the working bench area (the haul length is a <br />maximum of 394 feet). Just prior to the reclamation of the active mining area, that same overburden <br />material will be collected for treatment of the topsoil prior to using it to fill the open cut as required in <br />the reclamation process. <br />Final grading can then proceed and will be graded to the contours as shown on the reclamation plan. <br />The approximate range of slope gradient at reclaimed areas is 20% to 30% and is intended to match <br />existing grade. <br />RA2000\2089.00 Sprague Quarry\DOCUMENTS\PERMITS\2015 Mining Permit\For Permit Package Submittal\Exhibits\Exhibit E - Reclamation <br />Plan.docx <br />