Laserfiche WebLink
Application For Discharges Associated With Sand & Gravel Mining And Processing www.coloradowateM2rmits.com <br />K. OUTFALLS <br />For each process water outfall, provide a description of: <br />- latitude and longitude (format described in section 2 of application) <br />- all operations contributing wastewater to the effluent, including water associated with product crushing or washing, equipment <br />washing, sanitary wastewater, groundwater; <br />- the treatment received by the wastewater, including an identification of any chemical additives used. <br />- the average flow contributed by each operation; <br />Use additional oaees as needed. <br />Outfall <br />Number <br />Latitude and <br />Longitude <br />Wastewater Source <br />Treatment <br />used <br />Average Flow, <br />MGD* <br />Design ** Flow, <br />MGD <br />Receiving <br />Water(s) <br />001 <br />NONE <br />*MGD - Million gallons /day <br />* *If sediment pond, indicate approximate volume of water. <br />L. WATER QUALITY DATA <br />Analytical data for the following parameters shall be submitted for at least one grab sample from each discharge point. If no water is <br />currently available for analysis, so indicate. <br />Alkalinity (mg /1) pH (s.u.) <br />Dissolved Solids (mg /I)Total COD (mg/1) <br />Suspended Solids (mg /1) X No water to analyze at this time <br />Oil and Grease (mg/1) <br />The Division may request analysis of other parameters once the application has been reviewed. <br />M. ACTIVITY DURATION <br />When did the activity commence? 04 -01 -2015 <br />What is the estimated life of the activity from which the discharge(s) identified in Section 4 originate? 3 years. <br />page 6 of 7 revised Jan 2014 <br />