2015-02-25_HYDROLOGY - M1982020 - Laserfiche WebLink

Home Browse Search

AC Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 Aspen Industrial, Inc ACZ Project ID: L19808 L19808 -01 WG369476 Cadmium, dissolved M200.8 ICP -MS WG369506 Cyanide, total M335.4 - Colorimetric wl distillation WG369038 Nitrate /Nitrite as N, dissolved M353.2 - Automated Cadmium Reduction Nitrite as N, dissolved M353.2 - Automated Cadmium Reduction WG369378 Sulfate D516 -02/ -07 - Turbidimetric L19808 -02 WG369099 Aluminum, total M200.7 ICP Iron, total M200.7 ICP WG369506 Cyanide, total M335.4 - Colorimetric w/ distillation WG369038 Nitrate/Nitrite as N, dissolved M353.2 - Automated Cadmium Reduction Nitrite as N, dissolved M353.2 - Automated Cadmium Reduction WG369068 Residue, Non - Filterable (TSS) @105C SM2540D WG369378 Sulfate D516 -02/ -07 - Turbidimetric L19808 -03 WG369099 Aluminum, total Iron, total WG369506 Cyanide, total WG369038 Nitrate /Nitrite as N, dissolved Nitrite as N, dissolved M200.7 ICP M200.7 ICP M335.4 - Colorimetric w/ distillation M353.2 - Automated Cadmium Reduction M353.2 - Automated Cadmium Reduction WG369068 Residue, Non - Filterable (TSS) @105C SM2540D WG369378 Sulfate D516 -02/ -07 - Turbidimetric REPAD.15.06.05.01 M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. L19808- 1408201022 Page 21 of 26