Laserfiche WebLink
OTTEC F120 FROTHER SUPERSEDES: August 31, 2012 <br />arch 4, 2014 <br />,,,,xrrmufn�fllu 4:x /ur u/ Flnl:lf/nn Clagln/Cn!! TEanrrnlr r�✓ <br />8. EXPOSURE CONTROLS AND PERSONAL PROTECTION <br />ENGINEERING CONTROLS <br />Mechanical ventilation may be necessary if working with the product in enclosed areas or at elevated temperatures. <br />Utilize a closed system process when available. If not available, provide adequate ventilation. <br />PERSONAL PROTECTIVE EQUIPMENT <br />EYES: When contact with product is possible, use face shield. Otherwise use safety glasses with side shields <br />or goggles <br />SKIN: Use full protective clothing, chemical boots, and chemical gloves to prevent contact with skin. <br />RESPIRATORY Respiratory protection is normally not required except in emergencies or when conditions cause <br />PROTECTION: excessive airborne levels of mists or vapors. <br />ADDITIONAL ADVICE <br />Food, beverage and tobacco products should not be carried, stored or consumed where this material is used. Before <br />eating, drinking, or smoking, wash face and hands with soap and water. <br />9. PHYSICAL AND CHEMICAL PROPERTIES <br />APPEARNCE AND ODOR: <br />Colorless liquid <br />BOILING POINT: <br />270oF (132 °C) <br />MELTING POINT: <br />-1940F (- 126 °C) <br />VAPOR PRESSURE: <br />5mm HG @ 21 °C <br />SPECIFIC GRAVITY: <br />0.81 @ 150C <br />VAPOR DENSITY: <br />3.5 (air = 1) <br />% VOLATILE (BY WT.): <br />100% <br />PH: Not applicable <br />SATURATION IN AIR (% by Vol): 0.66 <br />EVAPORATION RATE: 0.33 (Butyl acetate = 1) <br />SOLUBILITY IN WATER: 1.7g /1008 <br />VOLATILE ORGANIC CONTENT: Not available <br />FLASH POINT: 1020F (390C) Tag Closed Cup <br />FLAMMABLE LIMITS (% BY VOL.): Lower: —1.2 Upper: —8.0 <br />AUT_OIGNITION TEMPERATURE: 10810F (583 0C) <br />DECOMPOSITION TEMPERATURE: 2120F (1000C) <br />PARTIAL COEFFICIENT (n- octanol /water): Not available <br />ODOR TRESHOLD: See Section 2 for exposure limits <br />10. STABILITY AND REACTIVITY <br />STABILITY: Stable <br />CONDITIONS TO AVOID: Keep away from heat, spark, flame <br />POLYMERIZATION: Will not occur- <br />CONDITIONS TO AVOID: None known <br />INCOMPATABILE MATERIALS: Avoid contact with strong oxidizing agents, inorganic acids, and <br />halogens <br />HAZARDOUS DECOMPOSITION PRODUCTS: Not expected <br />Ill. TOXICOLOGICAL INFORMATION <br />Toxicological information for the product is found under SECTION 3: HAZARDS IDENTIFICATION <br />Toxicological information on the regulated components of this product is as follows: <br />The acute oral (rat) and acute dermal (rabbit) LD50 values for this product are 2.6 g /kg and 3.6 g /kg, <br />respectively. Direct contact with this product can cause skin irritation. Direct contact with this product can cause eye <br />burns. Irreversible corneal damaqe may occur. <br />Page 3 of 5 <br />