Laserfiche WebLink
NOTE Additional Information regarding Hole HW-8111 <br /> An 18"conductor hole was drilled from Surface to 80'. 10-3/4"conductor pipe installed from 0-80'. <br /> Monitor hole was drilled to a 9-7/8" diameter from 80-2285 feet in depth. <br /> Hole under reamed 9-7/8"- 12-1/4" from 2127-2285' <br /> 7-5/8" surface casing was run in the hole from Surface to 2127' (Returns to Surface). <br /> Surface Casing cemented with!: CEMENT TYPE %ADDITIVES: <br /> LEAD: Pump 124 bbls (290 sx, 2.38 cu ft/sx), Litecrete at 9.5 ppg w/45 lb/sx D907 + 8.9 lb/sx D154 +46.5 lb/sx D124 + <br /> 0.5% BWOB D065 Dispersant+ 0.2% BWOB, D046 Antifoam + 0.2% BWOB, D167 Fluid loss + 0.25 lb/sx pumped at 3 <br /> BPM followed by: <br /> TAIL: Pump 21 bbls (82 sx, 1.47 cu ft/sx) of Class G design cement at 15.8 ppg w/94 lb/sx D907 + 0.2% D046 BWOB <br /> Antifoam +0.15% BSOB, D013 Retarder+ 0.3% BSOB, + D065 Dispersant+ 30.0% BWOB, D066 Silica pumped at 3.0 <br /> BPM. <br /> Drill out shoe w/6-1/2" bit 2075' to 2130' <br /> Wash and clean out hole 2130' —2285' <br /> Run 4.5"-27.96#/ft. Stainless Steel (SS) canister from 2130'-2265' <br /> Run 4.5"-11.6#/ft J-55 casing from 0'-2130' <br /> Placed swellable packer 2060'-2075' <br />