Laserfiche WebLink
NOTE Additional Information regarding Hole HW-8107 <br /> Monitor hole was drilled to a 9-7/8" diameter from 80'-2285' TD. <br /> Hole was Under reamed to 9-7/8"to 12-1/4" from 2238'-2285' TD <br /> Run 7.625" Casing from 0' —2127' <br /> Mix and Pump 40 bbls Mud push at 9.0 ppg, followed by: <br /> Cement Casing with: <br /> LEAD: Pump 131 bbls (305 sx, 2.41 cu ft/sx), Litecrete at 9.4 ppg w/45 lb/sx D907 + 9 lb/sx D154 + 47 lb/sx D124 <br /> 0.5% BWOB, D065 Dispersant+ 0.2% BWOB, D046 Antifoam + 0.2 BWOB, D167 Fluid Loss +0.25% ob/sx <br /> pumped at 3 BPM: followed by <br /> TAIL: Pump 24 bbls (91 sx, 1.47 cuft/sx) of Design cement at 15.8 Class G design cement at 15.8 ppg <br /> w/94 lb/sx D907 + 0.2% D046, BWOB Antifoam + 0.15% BSOB, D013 Retarder+ 0.3% BSOB, D065 Dispersant <br /> + 30.0% BWOB, D066 Silca pumped at 2.3 BPM. <br /> Good Returns on entire job <br /> Drill out w/6-1/2" bit 2075' to 2128' <br /> Wash out mud 2128'-2285' TD <br /> Run 4.5"-27.96#/ft. Stainless Steel (SS) canister from 2129'-2265' <br /> Run 4.5"-11.6#/ft J-55 casing from 0'-2129' <br /> Placed swellable packer 2057'-2072' <br />