Laserfiche WebLink
ALCOMER 120L <br /> SECTION VIII: PREVENTATIVE MEASURES <br /> Personal protective equipment: In absence of proper ventilation use approved respirator with organic vapour/mist cartridges <br /> as required.Wear impervious gloves. Use chemical goggles and/or face shield.Suggest rubber apron. <br /> Specific engineering controls: Use local exhaust ventilation, process enclosure or other engineering controls to maintain level of <br /> airborne vapour or mist below TLV. Ensure eye wash station and safety shower are available. <br /> Procedures for leak/spills: Use appropriate safety equipment. Eliminate sources of ignition.Stop leak if possible to do so <br /> without risk.Small spills:Soak up with absorbent;collect absorbent in approved container for disposal;wash spill area with <br /> water. Large spills: Dike to prevent material from entering sewers or public waterways;collect uncontaminated material for <br /> repackaging;collect contaminated material for disposal;treat remaining material as a small spill. Report spill to appropriate <br /> agencies as required. <br /> Waste disposal: Dispose in accordance with federal, provincial and local regulations. It is the responsibility of the <br /> end-user to determine if material meets the criteria of hazardous waste at the time of disposal. Empty containers,that have not <br /> been cleaned and purged, must be disposed or,or recycled,in accordance with local regulations. <br /> Handling procedures and equipment: Warning! Eye and skin irritant. In accordance with good industrial practice, handle with <br /> care and avoid unnecessary personal contact.Avoid contact with eyes and prolonged or repeated skin contact.Avoid breathing <br /> vapours,mists or sprays. Use only with adequate ventilation. Remove contaminated clothing;launder or dry-clean before reuse. <br /> Wash thoroughly with soap and water after using. For industrial use only.Slip hazard when wet. <br /> Storage requirements: For industrial use only.Slip hazard when wet. Store in the original container, securely closed,in a cool <br /> and dry location.Avoid temperature extremes,especially frost and freezing conditions. Empty containers contain residual <br /> hazardous material and should be handled and stored as if full. <br /> Special shipping information: Not applicable <br /> SECTION IX: PREPARATION <br /> Date updated:July 11, 2013 Prepared by: Product Safety Committee <br /> All the recommendations and suggestions herein concerning this product are based upon tests and data believed to be reliable, <br /> however it is the user's responsibility to determine the safety,toxicity and sustainability for their own use of the product <br /> described herein. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by <br /> Q'Max Solutions Inc.as to the effects of such use,the results to be obtained, or the safety and toxicity of the product nor does <br /> Q'Max Solutions Inc.assume any liability arising out of use by others. Nor is the information herein to be considered as <br /> absolutely complete since additional information may be necessary or desirable when particular or exceptional conditions or <br /> circumstances exist or because of applicable laws or government regulations. <br /> "dedicated to exceeding customer expectations" 4 OF 4 <br />