2014-10-17_PERMIT FILE - C1981035A ‎(3)‎

• Permit No: C1981035A
• IBM Index Class Name: Permit File
• Doc Date: 10/17/2014
• Doc Name: Licenses and Permits
• Section_Exhibit Name: KII Appendix 02 Licenses and Permits
• Media Type: D
• Archive: Yes

PART
Pagr No.
Permit No. COG-50001
The plan shall identify potential sources of pollution (including sediment), which may reasonably be expected to affect the
quality of stormwater discharges associated with the mining activity. In addition, the plan shall describe the practices to be
used to reduce the pollutants in stormwater discharges associated with mining activity at the facility; and ensure the practices
are selected and described in accordance with good engineering practices, including the installation, implementation and
maintenance requirements. Also, the plan shall be properly prepared, and updated in accordance with Part I.D.S.c, to ensure
compliance with the terms and conditions of this permit.
Facilities must implement the provisions of the SWMP as written and updated, from commencement of site activity until final
reclamation is complete, as a condition of this permit. The Division reserves the right to review the SWMP, and to require the
pernrittce to develop and implement additional measures to prevent and control pollution as needed.
The permittee must implement the provisions of SWMP required under this part as a condition of this permit.
For any sites under this permit that had permit coverage before September 30, 2007, the permittee's SMWP roust mee
the new SWMP requirements as summarized in Section M of the rationale. Any needed changes must be made withii
S months of the effective date of the certification.
The SWMP shall include the following items, at a mrnrmum
Site Map: The plan shall provide a site map or maps, which indicate at a rainimum
- Mining site boundaries;
- Access and haul roads;
- Stornrwater outfalis and an outline of the drainage area of each stormwater outfall;
- An estimate of the direction of flow;
- Each existing strucUmd control measure to reduce pollutants in stormwater runoff;
- Non - structural BMPs, as applicable;
Springs, streams, wetlands and other surface waters;
- Mine drainage or any other process water,
- Dedicated asphalt or concrete batch plants;
- Areas used for recycling of asphalt or concrete
- All areas of soil disturbance;
- The location and description of all potential stormwater pollution sources, including, but not limited to, the
following:
Materials handling areas;
- Vehicle fueling areas;
Fertilizer or chemical storage areas;
- Areas used for storage or disposal of overburden, materials, soils or wastes; and
Areas used for mineral milling and processing.
- Boundary of tributary arcs that is subject to effluent limitations; and
- Date the map was prepared.
b. Description of Potential Pollutant Sources/Material Inventory: The SWMP shall identify potential sources of
pollutants (activities and materials) at the site, and assess the potential of these sources to contribute pollutain to
stormwater discharges associated with mining activities. The SWMP must also describe appropriate Best Maaagemer
Practices (BMPs) to reduce the potential of these identified sources to contribute pollutants to stormwater discharges.
At a minimum, each of the following shall be evaluated for the reasonable potential for coignbuftg pollutants to row
- Loading and unloading operations;
- Outdoor storage of chemicals or equipment;
- Crushing facilities or significant dust and particulate generating activities;
- On site waste disposal practices;
- Stockpiles of overburden, raw material, intermediate products, byproducts, finished products or waste products;
- Dedicated asphalt or concrete batch plants;
- Areas used for recycling of asphalt or concrete
Routine maintenance activities involving fertilizers, pesticides, detergents, fuels, solvents, oils, etc.;
Haul roads; and
- Disturbed areas.
In each case where stormwater pollution potential exists, appropriate preventive measures must be taken and
docuunented.