My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2004-06-29_PERMIT FILE - C1981038 (4)
DRMS
>
Day Forward
>
Permit File
>
Coal
>
C1981038
>
2004-06-29_PERMIT FILE - C1981038 (4)
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 3:16:04 PM
Creation date
10/20/2014 12:59:16 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981038
IBM Index Class Name
Permit File
Doc Date
6/29/2004
Doc Name
Colorado Discharge Permit (NPDES)
Section_Exhibit Name
Volume 7 Exhibit 12 High-Vol Sampling
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
52
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Section 2.2.5 <br />Revision No. 0 <br />Date May 1, 1977 <br />• Page 2 of 3 ~;r' <br />chamber, employing a saturated chemical solution that will <br />result in a relative humidity of less than 50 percent at a <br />temperature of approximately 20 to 25°C is recommended in <br />lieu of a controlled temperature/humidity weighing room. <br />An air conditioned room may be used for equilibration. <br />A relative humidity less than 50 percent and constant within <br />+5 percent, and an air temperature constant within +3°C must <br />be maintained in the room while filters are equilibrating. <br />A conveniently working relative humidity is 40 percent. A <br />hygrometer is maintained in the room and the relative humidity <br />must be checked daily. <br />Record hygrometer readings and any equilibration chamber <br />malfunction, discrepancies, or maintenance in the laboratory <br />data log, Figure 3.1. <br />5.3 Gravimetric Analysis <br />• Perform a balance check as specified in Section 2.1. <br />Weigh exposed filters to the nearest milligram on the analytical <br />balance within 30 seconds after removal from the equilibration <br />chamber. The weighing location should be in the conditioning <br />environment if practicable, otherwise the analytical balance <br />should be as close as possible to the conditioning chamber <br />in a location that is relatively free of air currents and <br />is at or near the temperature of the chamber. Record the <br />weight in the laboratory data log and on the hi vol field <br />data sheet. <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.