Laserfiche WebLink
_OTTEC F120 FROTHER „� SUPERSEDES: August 31, 2012 <br />arch 4, 2014 <br />8. EXPOSURE CONTROLS AND PERSONAL PROTECTION <br />ENGINEERING CONTROLS <br />Mechanical ventilation may be necessary if working with the product in enclosed areas or at elevated temperatures. <br />Utilize a dosed system process when available. If not available, provide adequate ventilation. <br />PERSONAL PROTECTIVE EQUIPMENT <br />EYES: When contact with product is possible, use face shield. Otherwise use safety glasses with side shields <br />or goggles <br />SKIN: Use full protective clothing, chemical boots, and chemical gloves to prevent contact with skin. <br />RESPIRATORY Respiratory protection is normally not required except in emergencies or when conditions cause <br />PROTECTION: excessive airborne levels of mists or vapors. <br />ADDITIONAL ADVICE <br />Food, beverage and tobacco products should not be carried, stored or consumed where this material is used. Before <br />eating, drinking, or smoking, wash face and hands with soap and water. <br />9. PHYSICAL AND CHEMICAL PROPERTIES <br />APPEARNCE AND ODOR: <br />Colorless liquid <br />BOILING POINT: <br />270OF (1320C) <br />MELTING POINT: <br />-194 °F (- 126 °C) <br />VAPOR PRESSURE: <br />5mm HIS @ 21 °C <br />SPECIFIC GRAVITY: <br />0.81 @ 15 0C <br />VAPOR DENSITY: <br />3.5 (air = 1) <br />VOLATILE (BY WT.): <br />100% <br />pH: <br />Not applicable <br />SATURATION IN AIR (% by Vol): <br />0.66 <br />EVAPORATION RATE: <br />0.33 (Butyl acetate = 1) <br />SOLUBILITY IN WATER: <br />1.7g/100g <br />VOLATILE ORGANIC CONTENT: <br />Not available <br />FLASH POINT: <br />1020F (390C) Tag Closed Cup <br />FLAMMABLE LIMITS (% BY VOL.): <br />Lower: —1.2 Upper: —8.0 <br />AUTOIGNITION TEMPERATURE: <br />1081OF (583 °C) <br />DECOMPOSITION TEMPERATURE: <br />212OF (100 °C) <br />PARTIAL COEFFICIENT (n-octa nol /water): <br />Not available <br />ODOR TRESHOLD: <br />See Section 2 for exposure limits <br />10. STABILITY AND REACTIVITY'. <br />STABILITY: Stable <br />CONDITIONS TO AVOID: Keep away from heat, spark, flame <br />POLYMERIZATION: Will not occur <br />CONDITIONS TO AVOID: None known <br />INCOMPATABILE MATERIALS: Avoid contact with strong oxidizing agents, inorganic acids, and <br />halogens <br />HAZARDOUS DECOMPOSITION PRODUCTS: Not expected <br />Ill. TOXICOLOGICAL INFORMATION <br />Toxicological information for the product is found under SECTION 3: HAZARDS IDENTIFICATION <br />Toxicological information on the regulated components of this product is as follows: <br />The acute oral (rat) and acute dermal (rabbit) LD50 values for this product are 2.6 g /kg and 3.6 g /kg, <br />respectively. Direct contact with this product can cause skin irritation. Direct contact with this product can cause eye <br />burns. Irreversible corneal damage may occur. <br />Page 3 of 5 <br />