My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2014-09-18_GENERAL DOCUMENTS - M1977493
DRMS
>
Day Forward
>
General Documents
>
Minerals
>
M1977493
>
2014-09-18_GENERAL DOCUMENTS - M1977493
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
9/6/2020 6:48:45 PM
Creation date
9/19/2014 6:40:12 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1977493
IBM Index Class Name
General Documents
Doc Date
9/18/2014
Doc Name
Mill Reagent Pilot Testing
From
Climax
To
DRMS
Permit Index Doc Type
General Correspondence
Email Name
ECS
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
38
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Product Name: POLYGLYCOL P 2000 Issue Date: 11/15/2012 <br /> Eye/Face Protection: Use safety glasses(with side shields). When handling hot material: Use <br /> chemical goggles. Wear a face-shield which allows use of chemical goggles, or wear a full-face <br /> respirator,to protect face and eyes when there is any likelihood of splashes. <br /> Skin Protection: No precautions other than clean body-covering clothing should be needed. When <br /> handling hot material, protect skin from thermal burns. Selection of specific items will depend on the <br /> operation. <br /> Hand protection: Chemical protective gloves should not be needed when handling this <br /> material. Consistent with general hygienic practice for any material, skin contact should be <br /> minimized. Use gloves with insulation for thermal protection,when needed. <br /> Respiratory Protection: Respiratory protection should be worn when there is a potential to exceed <br /> the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements <br /> or guidelines,wear respiratory protection when adverse effects, such as respiratory irritation or <br /> discomfort have been experienced, or where indicated by your risk assessment process. For most <br /> conditions, no respiratory protection should be needed; however, if material is heated or sprayed, use <br /> an approved air-purifying respirator. The following should be effective types of air-purifying <br /> respirators: Organic vapor cartridge with a particulate pre-filter. <br /> Ingestion: Use good personal hygiene. Do not consume or store food in the work area. Wash hands <br /> before smoking or eating. <br /> Engineering Controls <br /> Ventilation: Use local exhaust ventilation, or other engineering controls to maintain airborne levels <br /> below exposure limit requirements or guidelines. If there are no applicable exposure limit <br /> requirements or guidelines, general ventilation should be sufficient for most operations. Local exhaust <br /> ventilation may be necessary for some operations. <br /> 9. Physical and Chemical Properties <br /> Appearance <br /> Physical State Liquid. <br /> Color Colorless <br /> Odor Sweet <br /> Odor Threshold No test data available <br /> pH 7.7-8.8 DOWM 101495-TE94A <br /> Melting Point No test data available <br /> Freezing Point Not applicable <br /> Boiling Point(760 mmHg) decomposes prior to boiling. <br /> Flash Point-Closed Cup > 185 °C (>365 °F) ASTM D93 <br /> Evaporation Rate(Butyl No test data available <br /> Acetate= 1) <br /> Flammability(solid,gas) No <br /> Flammable Limits In Air Lower: No test data available <br /> Upper: No test data available <br /> Vapor Pressure negligible at ambient temperature <br /> Vapor Density(air= 1) >1 Literature <br /> Specific Gravity(H2O= 1) > 1.00 25 °C/25 °C Literature <br /> Solubility in water(by Insoluble <br /> weight) <br /> Partition coefficient, n- No data available for this product. <br /> octanol/water(log Pow) <br /> Autoignition Temperature No test data available <br /> Decomposition No test data available <br /> Temperature <br /> Kinematic Viscosity 300 cSt @ 25 °C Literature <br /> Explosive properties Not explosive <br /> Oxidizing properties No <br /> Liquid Density 8.340 g/cm3 ASTM D4669 <br /> Page 4 of 8 <br />
The URL can be used to link to this page
Your browser does not support the video tag.