Laserfiche WebLink
AERO® 5688 Promoter SDS: 0004245 Date Prepared: 03/04/2014 Page 3 of 9 <br />MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED <br />None known <br />INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS <br />Not applicable <br />5. FIRE- FIGHTING MEASURES <br />Suitable Extinguishing Media: <br />Use water spray or fog, carbon dioxide or dry chemical <br />Protective Equipment: <br />Firefighters, and others exposed, wear self- contained breathing apparatus. Wear full firefighting protective clothing. See <br />MSDS Section 8 (Exposure Controls /Personal Protection). <br />Special Hazards: <br />Sulfur dioxide or hydrogen sulfide may be formed under fire conditions. Do not flush to sewer which may contain acid. <br />This could result in generation of toxic and flammable hydrogen sulfide. <br />6. ACCIDENTAL RELEASE MEASURES <br />Personal precautions: <br />Where exposure level is not known, wear approved, positive pressure, self- contained respirator. Where exposure level is <br />known, wear approved respirator suitable for level of exposure. In addition to the protective clothing /equipment in Section <br />8, wear a two piece PVC suit with hood or PVC overalls with hood. <br />Methods For Cleaning Up: <br />Cover spills with some inert absorbent. Sweep up into containers for disposal. Flush spill area with water. <br />References to other sections: <br />See Sections 8 and 13 for additional information. <br />7. HANDLING AND STORAGE <br />HANDLING <br />Precautions: Wash hands thoroughly after handling. Wear protective gloves /clothing and eye /face protection. <br />Special Handling Statements: This product should not be mixed with acids since evolution of toxic and explosive <br />hydrogen sulfide gas could result. This precaution does not, of course, apply to addition of this reagent to flotation <br />pulps in amounts customarily used in flotation. <br />STORAGE <br />Store in accordance with local, state, and federal regulations. <br />8. EXPOSURE CONTROLS /PERSONAL PROTECTION <br />Engineering Measures: <br />Utilize a closed system process where feasible. Where this material is not used in a closed system, good enclosure and <br />local exhaust ventilation should be provided to control exposure. <br />Respiratory Protection: <br />Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures <br />exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure. <br />