Laserfiche WebLink
4 (FORM 2 - Public filing) <br />11. Describe proposed surface excavation or other land disturbance, including roads, pits, trenches, waste piles, drill pads and <br />collar areas of underground workings, ponds, etc... <br />No new roads will be constructed. Proposed drill holes and pads set upon or directly adjacent <br />to existing roads as indicated on Map 1A. <br />12. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, including anticipated number of holes, <br />diameter, depth, location, etc... Submit additional pages if necessary: <br />A. Drill Pads: Quantity 4.00 Average Width 60.00 (ft) Average Length 80.00 (ft) <br />B. Drill Holes: Quantity 4.00 Depth 600.00 (ft) Diameter 5.00 (i. <br />C. Mud Pits: Quantity 4.00 Average Width 6.00 (ft) Average Length 10.00 (ft) <br />Average Depth 3.00 (ft) <br />Described proposed underground work, including reopening of old workings, advancement of adits or shafts, <br />trenches, pits, cuts, rock dumps, or other types of disturbance, describe type, quantity and general dimensions: <br />No underground work is proposed as part of this project <br />F. Other Disturbances (please describe): <br />Disturbances will be minimal; approximately 0.30 per drill site: total potential disturbance <br />estimated at 1.20 acres. The drill holes will be diagonal. <br />G. Indicate Chemicals and Fuels used or stored on site. List type, quantity and method to store. <br />Drill Miiri 50 gallons <br />Diesel 10 gallons <br />Lubricants 5 gallons <br />F. NewRoad(s): Length 0.00 (ft) Width 0.00 (ft) <br />Significantly Upgraded Road(s) Length 0.00 (ft) Width 0.00 (ft) <br />Are culverts or other crossings proposed? If so, please describe: <br />No culverts will be necessary <br />