2011-08-26_REPORT - M1980244 (25)

Home Browse Search

ameO smooth drum compactor, passing over the entire fill surface at least 4 times (method compaction technique was applicable). D) Soil Liner Fill 1) VLF Soil liner fill (SLF) placement continued in the areas shown on Figure 2. One CAT 385 excavator loaded 40 ton articulating and CAT 777 haul trucks from the temporary stockpile locations. Subgrade was approved and moisturized prior to placement using a tandem -axel water truck. Placement was performed using a CAT D -6 LGP dozer, two CAT D -8 dozer, and a CAT skid steer loader in a one -foot compacted lift. Moisture conditioning of SLF material was performed using a tandem -axel water truck and compaction was achieved using a 10 -ton vibratory smooth drum compactor. Nuclear density testing, moisture verification, and depth checks were all performed, producing results within project specifications. Test locations were surveyed by Ames. E) Low Volume Solution Collection System 1) Low Volume Solution Collection Piping Placement of the low volume solution collection system continued at the LVCSF placement area shown on Figure 5a and 5b, advancing in front of the placement. Four -inch CPeP was placed and sandbagged in accordance with design drawings, constructing the mainline and the tertiary lines. The secondary geomembrane in the area was accepted prior to pipe placement. 2) Low Volume Solution Collection Fill (LVSCF) Low volume solution collection fill (LVSCF) placement within the Phase 5 VLF continued. LVSCF was placed in the area show on Figure 5a and 5b. The LVSCF was hauled from the processing area to the placement area using CAT 740 haul trucks loaded by a CAT 988 front - end loader. The LVSCF was placed in a 3 -foot lift using a CAT D -6 LGP dozer, a CAT D -7 LGP dozer, and a CAT D -8 LGP dozer except where haul routes were established. Haul route consisted of five -foot lifts, to be spread into 3 -foot lifts later. Laborers were present at all times during placement holding the low volume collection piping in place, removing debris /sandbags, and assisting the dozer operator with lift thickness. All LVSCF was placed on previously approved secondary geomembrane. AMEC field representatives monitored the LVSCF placement constantly. F) High Volume Solution Collection System 1) High Volume Solution Collection Piping No placement performed during the week. 2) Drain Cover Fill (DCF) No placement performed during the week (see Figure 6 for previous DCF placement). II) Storm Water Management A) Best Management Practices Best Management Practices are being observed throughout the VLF Phase 5 Project. VLF Weekly Report WE 09.04.10.1)