2011-11-19_REPORT - M1980244 ‎(5)‎

• Permit No: M1980244
• IBM Index Class Name: Report
• Doc Date: 11/19/2011
• Doc Name: FINAL REPORT, VOLUME 3 OF 3 2011 phase 5 valley leach facility ore storage 1 OF 2
• From: CC&V
• To: DRMS
• Media Type: D
• Archive: No

ff -3K
M�
SECTION 02776.0 GEOMEMBRANE
PART 1: GENERAL
1.01 SUMMARY
This SPECIFICATION describes requirements for the manufacture, fabrication (if needed), supply, and
installation of polyethylene geomembrane for lining of the valley leach facility, as shown on the DRAWINGS;
and construction quality control monitoring and testing. All procedures, operations, and methods shall be in
strict compliance with the SPECIFICATIONS, Construction Quality Assurance Plan, and the DRAWINGS.
1.02 SUBMITTALS
A. CONTRACTOR shall provide the following information relating to the geomembrane
MANUFACTURER and INSTALLER with its proposal.
1. Information from the MANUFACTURER including company name, address, telephone
number, the names of the company president and quality control manager, and narrative of
the company history.
2. Information from the MANUFACTURER on factory size, equipment, personnel, number of
shifts per day, and capacity per shift.
3. Quality Control Manuals from the MANUFACTURER and INSTALLER for the
installation and testing of the geomembrane, including trial seams, seaming, nondestructive
testing, destructive testing procedures, repair procedures and in -field quality control forms.
Upon review of the Quality Control Manuals, MANAGER may request additional testing
during the manufacturing process at no additional cost to CC &V.
4. A list of at least five completed facilities from the MANUFACTURER totaling a minimum
of 5 million (5,000,000) square feet between all five facilities of the type of geomembrane
that is being installed at the Cresson Project. Each entry in this list should specify the name
and purpose of the facility, its location and date of installation, the name of the owner, the
project manager, designer, fabricator (if any), and the geosynthetics installation contractor
and the name and telephone number of the contact at the facility who can discuss the project.
In addition, the geomembrane thickness and total square footage of the installation surface
should be included.
Installation capabilities of the INSTALLER.
6. Information on equipment and personnel from the INSTALLER.
A list of at least five completed facilities, totaling five million (5,000,000) square feet for
which INSTALLER has installed the type of geomembrane that is being installed at the
Cresson Project. For each installation, the following information shall be provided:
a. Name and purpose of facility, its location, and date of installation.
b. Name of owner, Design Engineer, MANUFACTURER, Fabricator, if applicable,
and name and telephone number of contact at the facility who can discuss the
project.
Section 02776 Page 1 of 22 September 3, 2008
Geomembrane Revision 1
CAAMEC_CC &V\Phase 5 VLF\PSSA Cert Report\Appendices\Appendix E \SPECS \02776.r1.doc