Laserfiche WebLink
ameO <br /> PART 2: PRODUCTS <br /> 2.01 MATERIALS <br /> A. Twelve-ounce Non-Woven Needle Punched Geotextile: <br /> 1. Geotextile shall be comprised of polyester or polypropylene fibers. <br /> 2. Rolls shall be free of holes,contamination,and foreign matter. <br /> 3. The geotextile supplied for the project shall meet or exceed the minimum (unless noted <br /> otherwise)roll values shown in the table below: <br /> MINIMUM AVERAGE ROLL VALUES FOR <br /> GEOTEXTILE MATERIAL <br /> ASTM Test <br /> Property Method Value <br /> Weight oz./s d. D 5261 11.9 <br /> Puncture lbs. D4833 130 <br /> AOS D4751 No. 80 to 140 Sieve <br /> PART 3: EXECUTION <br /> 3.01 INSTALLATION <br /> A. Geotextile Deployment <br /> CONTRACTOR shall handle geotextile in a manner to ensure that geotextile is not damaged, and <br /> shall comply with the following: <br /> 1. No equipment or tools shall damage the geotextile by handling,trafficking,or other means. <br /> 2. No personnel working on the geotextile shall smoke, wear damaging shoes, or engage in <br /> other activities that could damage the geotextile. <br /> 3. Cross seams between two(2)panels of geotextile shall be staggered by a minimum distance <br /> of five(5)feet on slopes greater than ten percent(10%). <br /> 4. In the presence of wind, all geotextiles shall be weighted with sandbags or the equivalent. <br /> Such sandbags shall be installed during deployment and shall remain until replaced with <br /> cover material. <br /> 5. Geotextile panels shall be deployed in such a manner as to preclude wrinkles and folds. <br /> Any wrinkle or fold that may manifest itself into other geosynthetic layers shall be removed. <br /> 6. Geotextile within the lined area shall be cut with a cutter approved by CERTIFYING <br /> ENGINEER,such as scissors. <br /> Section 02777 Page 4 of 5 May 9,2012 <br /> Geotextile Revision 1 <br />