Laserfiche WebLink
Case Narrative <br />Client: Coors Energy Company <br />Project/Site: Keenesburg Mine, CO <br />Job ID: 280 - 30603 -1 (Continued) <br />TestAmerica Job ID: 280 - 30603 -1 <br />Laboratory: TestAmerica Denver (Continued) <br />SPECIFIC CONDUCTIVITY , <br />Samples FPW (280- 30603 -1), AMW1 (280- 30603 -2), DH -96 (280- 30603 -3), DH -122 (280- 30603 -4), SMW -2 (280- 30603 -5), and AMW -2 <br />(280- 30603 -6) were analyzed for specific conductivity in accordance with SM20 2510B. The samples were analyzed on 06/30/2012. <br />No difficulties were encountered during the conductivity analyses. <br />All quality control parameters were within the acceptance limits. <br />TOTAL DISSOLVED SOLIDS <br />Samples FPW (280- 30603 -1), AMW1 (280- 30603 -2), DH -96 (280- 30603 -3), DH -122 (280- 30603 -4), SMW -2 (280- 30603 -5), and AMW -2 <br />(280- 30603 -6) were analyzed for total dissolved solids in accordance with SM20 2540C. The samples were analyzed on 07/06/2012. <br />No difficulties were encountered during the TDS analyses. <br />All quality control parameters were within the acceptance limits. <br />ANIONS (28 DAYS) <br />Samples FPW (280- 30603 -1), AMW1 (280- 30603 -2), DH -96 (280- 30603 -3), DH -122 (280- 30603 -4), SMW -2 (280- 30603 -5), and AMW -2 <br />(280- 30603 -6) were analyzed for anions (28 days) in accordance with EPA Method 300.0. The samples were analyzed on 07/05/2012. <br />Samples FPW (280- 30603 -1) [5X], AMW1 (280- 30603 -2) [10X], DH -96 (280- 30603 -3) [20X], DH -122 (280- 30603 -4) [5X] and [20X], SMW -2 <br />(280- 30603 -5) [20X] and [100X], and AMW -2 (280- 30603 -6) [20X] and [100X] required dilution prior to analysis due to the concentration of <br />target analytes. The reporting limits have been adjusted accordingly. <br />No difficulties were encountered during the anions analyses. <br />All quality control parameters were within the acceptance limits. <br />HARDNESS <br />Samples FPW (280- 30603 -1), AMW1 (280- 30603 -2), DH -96 (280- 30603 -3), DH -122 (280- 30603 -4), SMW -2 (280- 30603 -5), and AMW -2 <br />(280- 30603 -6) were analyzed for hardness in accordance with a calculated method. The samples were analyzed on 07/10/2012. <br />No difficulties were encountered during the Hardness analyses. <br />All quality control parameters were within the acceptance limits. <br />CORROSIVITY (PH) <br />Samples FPW (280- 30603 -1), AMW1 (280- 30603 -2), DH -96 (280- 30603 -3), DH -122 (280- 30603 -4), SMW -2 (280- 30603 -5), and AMW -2 <br />(280- 30603 -6) were analyzed for corrosivity (pH) in accordance with SM20 4500 H+ B. The samples were analyzed on 06/30/2012. <br />No difficulties were encountered during the pH analyses. <br />All quality control parameters were within the acceptance limits. <br />TestAmerica Denver <br />Page 5 of 31 7/16/2012 <br />