Laserfiche WebLink
ameo <br />SECTION 02710.0 PIPING <br />PART L GENERAL <br />1.01 RELATED SECTIONS <br />Refer to the following Sections for related work: <br />■ Section 02200.0 - Earthworks <br />■ Section 02776.0 - Geomembrane <br />■ Section 02777.0 - Geotextile <br />1.02 SUBMITTALS <br />A. CONTRACTOR shall abide by all qualification and submittal requirements. <br />B. CONTRACTOR shall provide product data including MANUFACTURER's technical data (resin), <br />test data (strength), and SPECIFICATIONS sufficient to allow evaluation by MANAGER and <br />CERTIFYING ENGINEER. <br />1.03 QUALITY ASSURANCE <br />A. All work shall be constructed, monitored, and tested in accordance with the requirements of the CQA <br />Plan. <br />B. Any work found unsatisfactory or any work disturbed by subsequent operations before acceptance is <br />granted shall be corrected by CONTRACTOR as directed by MANAGER at no additional cost to <br />CC &V. <br />PART 2: PRODUCTS <br />2.01 MATERIALS <br />A. High Volume Solution Collection Pipe: <br />1. 4 -inch "Highway Grade" perforated corrugated polyethylene (CPe) pipe, as manufactured by <br />Advanced Drainage Systems, Inc., or an equivalent approved by MANAGER, DESIGN <br />ENGINEER and CERTIFYING ENGINEER. <br />2. 6 -inch diameter "N -12" CPe pipe, as manufactured by Advanced Drainage Systems, Inc., or <br />an equivalent approved by MANAGER, DESIGN ENGINEER and CERTIFYING <br />ENGINEER. <br />3. 8 -inch diameter "N -12" CPe pipe, as manufactured by Advanced Drainage Systems, Inc., or <br />an equivalent approved by MANAGER, DESIGN ENGINEER and CERTIFYING <br />ENGINEER. <br />4. 10 -inch diameter "N -12" CPe pipe, as manufactured by Advanced Drainage Systems, Inc., <br />or an equivalent approved by MANAGER, DESIGN ENGINEER and CERTIFYING <br />ENGINEER. <br />Section 02710 Page 1 of 3 September 3, 2008 <br />Piping Revision 1 <br />SAProjects \1125 CC &V Phase 5 VLF \I - Tech Specs\Arequa IFC Specs \02710.r1.doc <br />