2013-11-04_PERMIT FILE - C1981022 ‎(23)‎

• Permit No: C1981022
• IBM Index Class Name: Permit File
• Doc Date: 11/4/2013
• Doc Name: CDOPH & E Air Pollution Control Permits
• Section_Exhibit Name: Exhibit 2.03-E4 Part 4
• Media Type: D
• Archive: No

STATE OF COLORADO
OF COGO
yeti � R�
COLORADO DEPARTMENT OF PUBLIC HEALTH AND ENVIRONMENT N r:
AIR POLLUTION CONTROL DIVISION
TELEPHONE: [phone] '876 •
CONSTRUCTION PERMIT
PERMIT NO: 98000812
DATE ISSUED: July 8, 2013
ISSUED TO: Oxbow Mining, LLC
INITIAL APPROVAL
Modification 6
THE SOURCE TO WHICH THIS PERMIT APPLIES IS DESCRIBED AND LOCATED AS FOLLOWS:
Surface facilities for underground coal mine known as the Elk Creek Mine located
immediately north of Somerset, Gunnison County, Colorado.
THE SPECIFIC EQUIPMENT OR ACTIVITY SUBJECT TO THIS PERMIT INCLUDES THE
FOLLOWING:
Underground coal mine, coal processing facility, associated equipment as listed in
Appendix A, coal handling, coal stockpiling, and hauling. See also Appendix A for AIRS
emission point listing.
THIS PERMIT IS GRANTED SUBJECT TO ALL RULES AND REGULATIONS OF THE COLORADO
AIR QUALITY CONTROL COMMISSION AND THE COLORADO AIR POLLUTION PREVENTION AND
CONTROL ACT C.R.S. (25 -7 -101 et se g, TO THOSE GENERAL TERMS AND CONDITIONS
INCLUDED IN THIS DOCUMENT AND THE FOLLOWING SPECIFIC TERMS AND CONDITIONS:
REQUIREMENTS TO SELF - CERTIFY FOR FINAL APPROVAL
1. Within sixty (60) after commencement of operation, compliance with the conditions contained on
this permit shall be demonstrated to the Division. It is the permittee's responsibility to self certify
compliance with the conditions. Failure to demonstrate compliance within 60 days may result in
revocation of the permit or enforcement action by the Division. Information on how to certify
compliance was mailed with the permit or can be obtained from the Division. (Reference:
Regulation No. 3, Part B, II.G.2)
2. Within sixty (60) after commencement of operation, the operator shall complete all initial
compliance testing and sampling as required in this permit and submit the results to the Division
as part of the self - certification process. (Reference: Regulation No. 3, Part B, Section III.E.)
3. For the mine, within sixty (60) after commencement of operation, the AIRS ID (example:
051/0007/999) number shall be posted in an easily visible location for ease of identification.
(Reference: Regulation No. 3, Part B, III.E.) (State only enforceable)
4. For process equipment (crushers, screens, etc.) Within sixty (60) after commencement of
operation, the AIRS ID (example: 051/0007/001) number shall be marked on the subject
051/0007/999 Page 1