Laserfiche WebLink
CONTROL <br />PANEL <br />SOLAR <br />PANEL <br />ANTENNA <br />POLE <br />(FIELD LOCATE) <br />STILLING WELL <br />ASSEMBLY <br />(RE -USE EXISTING) <br />FLOW <br />45.00° <br />NOTES: <br />1. MOVE EXISTING <br />EQUIPMENT FROM DROP <br />TOWER #17. <br />2. INSTALL NEW POLE FOR <br />MOUNTING. <br />Y2 "DIA.X6 "SS <br />CONCRETE ANCHOR BOLT <br />(TYP 4) <br />DROP TOWER #16 <br />FLOW <br />CDC <br />W /HEND <br />ANTENNA <br />FIELD ROUTE <br />LEAD TO <br />CONTROL PANEL <br />6" FG <br />ANGLE <br />°CK <br />T) <br />wN I MUD rA Nt1_ <br />36" RCP (FIELD LOCATE) <br />X 3 LEVEL SWITCH STILLING WELL <br />DROP TOWER CURTAIN <br />\ � GARMNN <br />NOT SHOWN D <br />0 1 2 4 6 <br />DROP TOWER #16 D Scale in Feet <br />1 PLAN VIEW <br />0 1 2 4 6 <br />Scale in Feet <br />SOLAR PANEL <br />ANTENNAS <br />DROP TOWER #16 <br />RISER DIAGRAM <br />NO SCALE <br />DROP TOWER #16 PLAN <br />� GENERAL ARRANGEMENT <br />NO SCALE <br />SCOPE OF WORK DROP TOWER #16 <br />INSTALL A POWER POLE ADJACENT TO THE DROP TOWER LOCATION FOR INSTALLATION OF THE RADIO <br />ANTENNA, SOLAR POWER SYSTEM, RADIO AND CONTROL EQUIPMENT ENCLOSURE. INSTALL FLOAT SWITCH <br />AT THE DROP TOWER #16 LOCATION. <br />GENERAL NOTES: DROP TOWER #16 <br />1. COORDINATE WITH HENDERSON MILL REGARDING DIGGING REQUIREMENTS AS RELATED TO POWER <br />POLE INSTALLATION. <br />2. COORDINATE WITH COMMUNICATION /CONTROL CONTRACTOR REGARDING COMMUNICATIONS AND <br />CONTROL EQUIPMENT INSTALLATION REQUIREMENTS. <br />3. ELECTRICAL CONTRACTOR SHALL INSTALL FOR THE COMMUNICATION /CONTROL CONTRACTOR, THE <br />RADIO ANTENNA, ANTENNA COAX CABLE TO CONTROL ENCLOSURE, SOLAR PANELS AND CONTROL <br />ENCLOSURE. <br />4. COORDINATE WITH HENDERSON REGARDING SAFETY REQUIREMENTS FOR WORKING AT THE DROP <br />TOWER #16 LOCATION. <br />FLAG NOTES: <br />DINSTALL A 45-2 POLE APPROXIMATELY 10 FT FROM DROP TOWER #16 LOCATION. <br />2DCOORDINATE WITH HENDERSON MILL REGARDING EXACT POLE LOCATION AND LOCATION OF <br />BURIED ITEMS (PIPE SYSTEM, ELECTRICAL, ETC.). <br />3DINSTALL CONDUIT FROM POLE TO DROP TOWER #16 FOR FLOAT SWITCH SIGNAL CONDUCTORS, <br />INSTALL LIQUID -TIGHT FLEXIBLE CONDUIT AT THE CONNECTION POINT BETWEEN THE RMC AND THE <br />ENCLOSURE. <br />> INSTALL FLOAT SWITCH AT DROP TOWER #16. INSTALLATION METHOD SHALL BE PER HENDERSON <br />MILL STANDARD FOR DROP TOWER LOCATIONS. <br />SD ADJUST THE FLOAT LEVEL PER HENDERSON LEVEL REQUIREMENTS. <br />SOLAR PANEL TO BE MOUNTED 70° FROM VERTICAL AND SHALL HAVE A CLEAR SOUTHERLY VIEW. <br />7D ANTENNAS TO BE AIMED AS DIRECTED BY HENDERSON PERSONNEL. <br />BD ANTENNAS TO BE SPACED 3 FT APART. <br />9D ANTENNA CONDUCTOR TO BE WRAPPED WITH ELECTRICAL TAPE, THEN MASTIC TAPE, FOLLOWED <br />BY A FINAL SEAL OF ELECTRICAL TAPE. <br />O> CONNECT ANTENNA CABLE SHIELD TO GROUND AT ENCLOSURE LOCATION. <br />DROP TOWER #16 <br />ELEVATION <br />0 1 2 4 6 <br />Scale in Feet <br />rn <br />z <br />o <br />N <br />j <br />w <br />'rh,s drew to ether with and all additions, <br />corrections, 9 hanger and alterations thereof is the <br />property of Climax Molybdenum Company and is <br />furnished on the express condition that it shall <br />not be reproduce4 copied, lent, w disposed of <br />directly or indirectly, nor used for ony other <br />purpose than for Which it is specifr'colly furnished <br />without the prior WrittM consent Of said Climax <br />Molybdenum Company" <br />a <br />o <br />W <br />Z <br />W <br />LL <br />, ` C� //iiAX Molybdenum <br />xtit <br />A Freeport- McMoRan Company <br />Drop Tower #17 Removal <br />uimax Mopoenum Henaerson Mm <br />l Parshall, CO <br />_ <br />Q <br />0 <br />p <br />Level Switch <br />DCM <br />12/13/12 <br />NONE <br />390❑ S. INCA smear <br />W. W. WHEELER '700 oao, co eo 1 , o -34os <br />G gg6�CIATE ®, INC 303-761 -4130 <br />_ ,, „N, ae.,,,�- .,,e., .,s rnx 303- 961 -2802 <br />Q <br />Installation <br />gNjNjY <br />"SWeV <br />12/13/12 <br />3/13 <br />DRAWING NO. <br />SHEET <br />Qt <br />0 <br />General Arrangement <br />