2013-11-08_REPORT - M1977342 - Laserfiche WebLink

Home Browse Search

t i 001929 -No. 1 Diesel Fuel y Date of Issue: 20- Mar -2007 Page 3/8 Status: Final Environmental precautions: Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems, and natural waterways. Dike far ahead of spill for later recovery or disposal. Use foam on spills to minimize vapors (see Section 5). Spilled material may be absorbed into an appropriate absorbent material. Methods for cleaning up: Notify fire authorities and appropriate federal, state, and local agencies. Immediate cleanup of any spill is recommended. If spill of any amount is made into or upon navigable waters, the contiguous zone, or adjoining, shorelines, notify the National Response Center (phone number 800- 424 - 8802). DLlf��a.:: AN�3:.$ TC��E :...:...::.:......:.....::.:::::.:..::. ::....�........................ :. :......- ..... ... .. . Handling: Open container slowly to relieve any pressure. Bond and ground all equipmentwhen transferring from one vessel to another. Can accumulate static charge by flow or agitation. Can be ignited by static discharge. The use of explosion -proof electrical equipment is recommended and maybe required (see appropriate fire codes). Refer to NFPA -704 and /or API RP 2003 for speck bonding /grounding requirements. Do not enter confined spaces such as tanks or pits without following proper entry procedures such as ASTM D -4276 and 29CFR 1910.146. The use of appropriate respiratory protection is advised when concentrations exceed any established exposure limits (see Section 8). Do not wear contaminated clothing or shoes. Keep contaminated clothing away from sources of ignition such as sparks or open flames. Use good personal hygiene practices. "Empty" containers retain residue and may be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition. They may explode and cause injury or death. "Empty" drums should be completely drained, properly bunged, and promptly shipped to the supplier or a drum reconditioner. All containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. Before working on or in tanks which contain or have contained this material, refer to OSHA regulations, ANSI Z49.1, and other references pertaining to cleaning, repairing, welding, or other contemplated operations. Storage: Keep container(s) tightly closed. Use and store this material in cool, dry, well- ventilated areas away from heat, direct sunlight, hot metal surfaces, and all sources of ignition. Post area "No Smoking or Open Flame." Store only in approved containers. X0vsu��Gar��+��.s ggni;.. :. ;: •.::....:::. e ydrodesulfurized Kerosene TWA: 200 mg /m' — �- .C9 -16 Skin ydrotreated Distillate, Light TWA: 200 mg /m' --- - -- .C9 -16 Skin based on Kerosene 8008 -20 -6 erosene ..C9 -16 TWA: 200 mg /m' - -- - -- r Skin Note: State, local or other agencies or advisory groups may have established more stringent limits. Consult an industrial hygienist or similar professional, or your local agencies, for further information. Engineering controls: If current ventilation practices are not adequate to maintain airborne concentrations below the established exposure limits additional engineering controls may be required. Personal Protective Equipment (PPE): Eye /Face: Approved eye protection to safeguard against potential eye contact, irritation, or injury is recommended. Depending on conditions of use, a face shield may be necessary. Skin: The use of nitrile gloves impervious to the specific material handled is advised to prevent skin contact, possible irritation, and skin damage (see glove manufacturer literature for information on permeability). Depending on conditions of use, nitrile apron and /or arm covers may be necessary.