Laserfiche WebLink
TECHNICAL SPECIFICATIONS <br />SECTION 02776.1 <br />GEOMEMBRANE <br />PART 1 - GENERAL <br />1.1 SUMMARY <br />A. This SPECIFICATION describes requirements for the manufacture, fabrication (if needed), supply, and <br />installation of polyethylene geomembrane for lining of the PSES Pipe Rack, as shown on the <br />DRAWINGS; and construction quality control monitoring and testing. All procedures, operations, and <br />methods shall be in strict compliance with the SPECIFICATIONS, Construction Quality Assurance <br />Plan, and the DRAWINGS. <br />1.2 SUBMITTALS <br />A. CONTRACTOR shall provide the following information relating to the geomembrane <br />MANUFACTURER and INSTALLER with its proposal. <br />1. Information from the MANUFACTURER including company name, address, telephone number, <br />the names of the company president and quality control manager, and narrative of the company <br />history. <br />2. Information from the MANUFACTURER on factory size, equipment, personnel, number of <br />shifts per day, and capacity per shift. <br />3. Quality Control Manuals from the MANUFACTURER and INSTALLER for the installation and <br />testing of the geomembrane, including trial seams, seaming, nondestructive testing, destructive <br />testing procedures, repair procedures and in -field quality control forms. Upon review of the <br />Quality Control Manuals, MANAGER may request additional testing during the manufacturing <br />process at no additional cost to CC &V. <br />4. A list of at least five completed facilities from the MANUFACTURER totaling a minimum of 5 <br />million (5,000,000) square feet between all five facilities of the type of geomembrane that is being <br />installed at the Cresson Project. Each entry in this list should specify the name and purpose of the <br />facility, its location and date of installation, the name of the owner, the project manager, designer, <br />fabricator (if any), and the geosynthetics installation contractor and the name and telephone <br />number of the contact at the facility who can discuss the project. In addition, the geomembrane <br />thickness and total square footage of the installation surface should be included. <br />Installation capabilities of the INSTALLER. <br />Information on equipment and personnel from the INSTALLER. <br />7. A list of at least five completed facilities, totaling five million (5,000,000) square feet for which <br />INSTALLER has installed the type of geomembrane that is being installed at the PSES Pipe Rack <br />Liner Extension Project. For each installation, the following information shall be provided: <br />a. Name and purpose of facility, its location, and date of installation. <br />b. Name of owner, Design Engineer, Manufacturer, Fabricator, if applicable, and name and <br />telephone number of contact at the facility who can discuss the project. <br />C. Thickness of geomembrane and surface area of the installed geomembrane. <br />d. Type of seaming, patching, and tacking equipment. <br />e. A copy of the manufacturer's and /or Fabricator's approval letter(s) and /or license(s), if <br />applicable. <br />Geomembrane August 28, 2013 <br />02776.1 -1 Revision 0 <br />S \Projects \1550 - CC &V Field Spt CQA PSES B1dg \8 0 Project Engineering and Design \8 2 SpecrficanonsTSES Pipe Rack Liner Extension Specifications \02776 1 Cm membrane doex <br />