WSP03027 - Laserfiche WebLink

Home Browse Search

Par. 293 :2 G 1~1 these specifications, the details shown on other drawings or the requirements of the specifications shall govern. In the event there are minor differences as determined by the contracting officer between details and dimensions shown on the drawings and those of existing features at the site, the details and dimensions of existing features at the site shall govern. The drawing of the existing Rock Canyon Barrier Dam is included for the information of bidders. The conversion of the datum used in the Rock Canyon Barrier Dam drawing to the U.S. Coast and Geodetic Survey datum used in the specifications drawings can be made by subtracting 13.3 feet from the elevations shown on the Rock Canyon Barrier Dam drawing. The attached drawings will be supplemented by such additional or revised general and detail drawings as ms'f be necessary or desirable as the work progresses; and the contractor shall do no work without proper drawings and instructions. The additionai Oi re...!s~d general and detail drawings furnished by the Government will show dimltflslnn: and details necessary for construction purposes more completely than are shown on the attached drawings for all drawings for all features of the work. The contractor will be required to perform the work in accordance with the additional general and detail drawings or revisions furnished by the Government at the applicable prices bid in the schedule for such work. The contractor shall check all drawings carefully and advise the contracting officer of any errors or omissions discovered. The contractor will be furnished such additional copies of the specifications and drawings as may be required tor carrying out the work. Full-size contact prints of the original drawings from which the attached reproductions were made, other than 40-0. and 104-0. series Standard Drawings will. be furnished to the contractor for construction purposes upon request. Additional rota prints of the 4()'D. and 104.0. Standard Drawings will be furnished to the contractor for construction purposes upon request. The number of prints of each drawing furnished to the contractor will be limited to 10 contact prints and 1 reproducible. All drawings and data submitted by the contractor for which a specific mailing address is not given in these specifications shall be submitted to Construction Engineer, Post Office Box 551, Salida, Colorado B1201. . .., .. . . .' . x Interior-Reclamation. Denver, Colorado