Laserfiche WebLink
<br />DRAFT SUBDIVISION ORDINANCE <br /> <br />5-420 <br /> <br />91 <br /> <br />002388 <br /> <br />0~. <br />~.; <br />....-'., <br />'"",,",, <br /> <br />(1) Location of any structural storage faoilities for <br />chemicals, explosives, buoyant mAterials, flammable <br />liquids or other toxic materials which could be <br />hazardous to public health, safety and welfare in <br />a manner which will assure that the facilities are <br />situated at elevations above the height associated <br />with the regulatory protection elevation or are <br />adequately flood-prOOfed to prevent flotation of <br />storage containers, o~. damage to storage oontainers <br />which oould result in the escape of toxic materials <br />into flood waters. <br /> <br />SECTION 6.0 PROCEDURE FOR PLAT APPROVAL <br /> <br />posed subdivision. <br /> <br />The second step is the preparation and sub- <br /> <br />mission of a final plat together with required certificates. <br />This final plat becomes the instrume~t to be recorded in the <br />office of the County Register when duly signed by the Secretary <br /> <br />of the <br /> <br />(review agency,). <br />and informally with the <br /> <br />The subdivider should consult early <br />and its technical staff <br /> <br />. (review agency) <br />for advioe and assistance before the preparation of the preliminary <br /> <br />sketch plat and its formal applioation for approval. This will <br /> <br />enable him to become thoroughly familiar with these standards <br /> <br />and procedures. Such informal review should prevent unneces- <br /> <br />sary and costly revisions. <br /> <br />6.1 Preliminary Plat Review and Approval. <br /> <br />6.11 <br /> <br />The Preliminary Plat. The subdivider shall submit <br />in duplicate a preliminary plat to the <br /> <br />(review <br />The preliminary plat shall be drawn <br /> <br />~~~t:~ <br /> <br />agency) <br />to a scale of not less than one inch equals one <br />. feet. The preliminary plat should <br />contain the fOllowing information: <br />