Laserfiche WebLink
<br />on13J4 <br /> <br />NCTRL(I,J) <br /> <br />NDWTR(I,J} <br /> <br />NEX(I,J) <br /> <br />NM(I) <br /> <br />NMASBER <br /> <br />Table describing reach configurations. <br /> <br />I = Index of the reach. <br />J = 1 Reach number of reach I. <br />J = 2. Index of the reach immediately down- <br />stream of reach I. (Read as a reach <br />number in READER and converted to an <br />index in INITIAL.) <br />J = 3 Inflow sequence index of the point <br />in the downstream reach that re- <br />ceives the outflow from reach I. <br />J = 4 to 20 Reach numbers of adjacent up- <br />stream reaches that flow into <br />reach I. <br /> <br />Read from CONNOD cards in READER. <br /> <br />Table of upstream reaches where additional <br />supplies of water may be found if a short <br />supply is encountered while processing a <br />reach. <br /> <br />I = Index of the <br />J = 1,3,5, etc. <br /> <br />reach being processed. <br />Indices of the upstream <br />reaches with potential ad- <br />ditional supply. <br />Sequence numbers (of the <br />reach being processed) where <br />the supply from J=1,3,5,etc. <br />(respectively), enters the <br />reach being processed. <br /> <br />J = 2,4,6, etc. <br /> <br />Read from CONWAT cards in READER. <br /> <br />Process flag for special demands. <br />E = Export, S = salinity control project, <br />P = Pumped diversion from a reservoir. <br /> <br />I = Index of the reach where the demand is <br />located. <br />J = Demand sequence index. <br /> <br />Read from CONUSE card in READER. <br /> <br />The number of months of interest for each <br />TAPEDIT parameter. <br /> <br />I = TAPEDIT parameter 10 number. <br /> <br />The number of basinwide mass balance errors <br />encountered during the run. <br /> <br />30 <br />