Laserfiche WebLink
<br /> <br />002057 <br /> <br />. <br /> <br />Reservoir Inputs - Initial Conditions (Card Type 10-1) <br /> <br />The initial state of the reservoirs must be specified using the <br />10-1 cards. Included are the surface storage volume in 1,000 acre- <br />feet plus the total dissolved solids. Salinity units, specified by <br />'the salinity code, may be: <br /> <br />total mass of salts in the surface reservoir and the banks in <br />1,000 tons <br /> <br />concentration in ppm or tons/acre-foot. The program assumes the <br />same concentration for water in surface and bank storage. Con- <br />sequently, this concentration applies to the total volume of water. <br /> <br />Reservoir Inputs - Excess Water and Spill Options - Use of Variable <br />Exports <br /> <br />The computation of the quantity of additional uncontrolled spills <br />and/or excess water was discussed in the subsection, "Reservoir Inputs <br />Control Options." Allocation of this water to variable exports requires <br />the same type of information for either the spill or excess water option. <br />This includes the: <br /> <br />. <br /> <br />number of variable exports to which water will be allocated <br />(maximum number is 5) <br /> <br />. <br /> <br />2-14a <br /> <br />(rev. 03/75) <br /> <br />