WSPC03077

• File Number: 8062
• Description: Federal Water Rights - Colorado Litigation - National Forest ISF Claims - Division 2
• State: CO
• Basin: Statewide
• Date: 1/1/1996
• Author: CWCB
• Title: Materials of Interest - Development of Instream Flow Recommendations in Colorado Using R2CROSS - CWCB
• Water Supply Pro - Doc Type: Report/Study

I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
i I
I
I
I

001948

Existing fIle
The final suboption, "Existing file",
retrieves a previously-saved R2CROSS data set
from storage. Simply select the file to be
retrieved. Select the "Input" command on the
R2CROSS menu to edit the dataset. Staging
table calculations are initiated by selecting the
"Calculate" option. Remember, the "Calculate"
option cannot be run twice on the same fIle,

Printers
LaserJet
Dot Matrix
The "Printers" menu option is used to
format R2CROSS output for either a LaserJet
or Dot Matrix type printer. The proper printer-
type should be selected prior to running the
"Verify" or "Calculate" menu options, Use the
arrow keys to highlight the proper printer and
press the <ENTER> key. Experienced Lotus 1-
2-3 users can setup additional printers prior to
retrieving the R2CROSS,WK4 worksheet if
necessary. Consult a Lotus manual for specific
instructions on setting up other types of
printers,

Quit

Select the "Quit" menu option and
answer "No" to the Lotus prompt to de-activate
the R2CROSS macro and return to normal
Lotus 1-2-3 operations, De-activating the
R2CROSS macro allows for the use of standard
Lotus 1-2-3 commands on all unprotected cells
within the current data file. The R2CROSS
menu can be reactivated by simultaneously

pressing "<Ctrl> M", Alternatively, a new
R2CROSS worksheet can be brought up from
within Lotus 1-2-3 by retrieving the original
R2CROSS,WK4 file from the computer's hard
disk drive (see "Installation" section).

Terminating and Reactivating the

R2CROSS Macro
Situations may arise where the macro
must be terminated during data entry or
calculation routines. To terminate the
R2CROSS macro and return to the standard
Lotus 1-2-3 menu, press <Ctrl><Break>, Then
press the <Ese> key several times to clear the
Lotus error message screen,
If the R2CROSS macro was terminated
due to a data entry error or a problem with the
execution of the macro, the integrity of the
worksheet may have been compromised. If so,
the current worksheet should be erased and a
fresh copy of the R2CROSS,WK4 fIle retrieved
from the computer's hard disk drive. The data
should definitely be re-entered if the macro
failed during the "Calculate" option of
R2CROSS. Trying to rerun a compromised
dataset may result in additional problems and
unreliable output. It is always safer, albeit more
time consuming, to start over,
If you do not believe the data in the
current worksheet has been compromised, the
R2CROSS macro can be re-activated by
simultaneously pressing "<Ctrl> M", Macro
operation will begin with the standard
R2CROSS menu and data entry or calculations
may then resume within the existing file,

-27-