Laserfiche WebLink
<br />;.1 "I':", <br /> <br />. <br /> <br />Exhibit A cont. <br /> <br />. <br /> <br />. Climate (precipitation, temperature, evaporation) <br />. Snow Surveys <br />. NWS and NRCS forecasts <br />. Irrigated Acreage <br />. Crop Type <br />. Water Use Data (canal seepage, return flow patterns, irrigation practices, etc.) <br />. Ground Water Data (levels, recharge, drain flows, recharge zones, etc.) <br />. Geologic Structure (elevation and or thickness of the unconfined aquifer, <br />aquitard, confined aquifer, etc.) <br />. Geohydrologic parameters (Hydraulic conductivity, specific yield, storage <br />coefficient, 1eakence, etc.) <br />. Native and agricultural Evapotranspiration data. <br />. Geographic coverages (hydrography, elevation, soils, counties, water division <br />and district boundaries, public land surveys, soil cover, etc.). <br />2. Draft Data Assessment Section: Reformat and revise the Data Collection Report <br />developed above to be a section of the Feasibility report. <br />3. Final Data Assessmeut Section: Include State and Advisory Committee comments <br />into a final Data Assessment Section. <br /> <br />Deliverable: <br />1. Draft Data Collection Report <br />2. Draft Data Assessment Section. <br />3. Final Data Assessment Section with State and Advisory Committee comments. <br /> <br />Task 4 - South Platte Decision Support System Components <br /> <br />Responsibility: Contractor <br /> <br />Objective: Review the existing CRDSS and RGDSS systems and identify components <br />that can be used in SPDSS. Identify all the components required to develop the SPDSS <br />that cost effectively address the needs identified in the previous Tasks. Describe the <br />functionality of each component and the data requirements, including hardware and <br />software requirements as appropriate. <br /> <br />Approach: <br />1. Draft SPDSS Components: Review the purposes explained in the Introduction of <br />this Scope of Work, the CRDSS and RGDSS documentation (WEBSITE; <br />http://cdss.state.co.us), and the previous task results to identify components that are <br />necessary for the SPDSS. Identify if new tools are required, existing tools exist and/or <br />what enhancements may be required to achieve the SPDSS objectives. Describe how <br />the various components might be linked or exchange information. Components of the <br />SPDSS may include but should not be limited to the following: <br />. System Design (CDSS) <br />. Surface Water Planning Model (CDSS others) <br />. Ground Water Simulation Model (SB-5, CDSS or New) <br /> <br />D,ISPDSSISP-SCOPE_ 4.doc <br /> <br />August 18,2000 <br /> <br />10 <br />