FLOOD09627 - Laserfiche WebLink

Home Browse Search

')(6) of this section be elevated so at either (i) The lowest floor of the manufac- red home is at or above the base ood elevation, or (ii) The manufactured home .chassis supported by reinforced piers or her foundation elements of at least uivalent strength that are 110 less an 36 inches In height above grade d be securely anchored to an ade- ately anchored foundation system resist floatation, collapse, and later- movement. (3) Notwithstanding any other pro- ions of I 60.3, a community may ap- ave certain development in Zones 1-30, AE, and AH. on the conununi- 's FIRM which Increase the water rface elevation of the base flood by ore than one foot, provided that the mmunity first applies for a condi- Dnal FIRM revision, fulfills the re- irements for such a revision as es- bUshed under the provisions of 65.12, and receives the approval of le Administrator. (4) Require that recreational vehi- es placed on sites within Zones Al- . AH. and AE on the community's RM either (i) Be on the site for fewer than 180 nsecutive days, (ll) Be fUlly licensed and ready for ghway use, or (Hi) Meet the permit requirements of . ragraph (b)(1) of this section and e elevation and anchoring require- euts for "manufactured homes" in ragraph (c)(6) of this section. recreational vehicle is ready for ghway use if it is on its wheels or cklng system, is att.ached to the site y by Quick disconnect type utlllties d security devices, and has no per- anently attached additions. (d) When the Administrator has pro- dcd a notice of final base flood eleva. ns wit.hln Zones AI-30 and/or AE the communit.y's FIRM and, if ap- opriate, has designated AO zones, zones, A99 zones, and A zones on e community's FIRM, and has pro- ded data from which the community Lall designate it;s regulatory flood-. .y, the community shall: (1) Meet the requirements of para- 'aphs (c) (1) t.hrough (14) of this sec- )n; (2) Select and adopt a regulatory floodway based on the prinCiple that the area chosen for the regulatory floodway must be designed to carry the waters of the base flood. without Increasing the water surface elevation of that flood more than one foot at any point; (3) Prohibit encroachments, includ- ing fill, new construction, substantial improvements, and other development within the adopted regulatory flood- way unless it has been demonstrated through hydrologic and hydraulic analyses perfonned in accordance with standard engineering practice that the proposed encroachment would not result in any increase in flood levels within the community during the oc. currence of the base flood diSCharge; (4) Notwithstanding any other provi. sions of I 60.3. a community may permit encroachments within the adopted regUlatory floodway that would result in an increase in ba.<;e flood elevations, provided that the community first applies for a condi- tional FIRM and floodway revision, fulfills the requirements for such revi- sions as established under the provi- sions of 165.12, and receives the ap- proval of the Administrator. (e) \Vhen the Administrator has pro- vided a notice of final base flood eleva- tions within Zones AI-30 and/or AE on the community's FIRM and, if ap- propriate, has designated AH zones, AD zones, A99 zones, and A zones on the community's FIRM, and has iden- tified on the community's FIRM coast- al high hazard are&s by designating Zones VI-30. VE, and/or V, the com- munity shali: (1) Meet the requirements of para- graphs (c)(1) through (14) of this sec- tion; (2) Within Zones VI-30, VE, and V on a community's FIRM, (i ) obtain the elevation (in relation to mean sea level) of the bottom of the lowest structural member of the lowest floor (excludinl( plllngs and columns) of all new and substantially improved struc- tures, and whether or not such struc- tures contain a basement, and (ii) maintain a-re~ord of all such informa- tion with the official designated by the community under 159.22(a)(9)(jji); 264