Laserfiche WebLink
<br />9. SUPPLEMENTAL MATERIAL <br /> <br />The following supporting publications and illustrations are available from <br />HEC for computer program HEC-2, Water Surface Profiles: <br /> <br />a. HEC-2, Water Surface Profiles, Programmers Manual, 1976. <br /> <br />b. HEC Technical Paper No. 11, Survey of Programs for Water Surface <br />Profiles (1968) by Bill S. Eichert. (Published in the Journal of <br />the Hydraulics Division, ASCE, Vol. 96, No. HY 2, February 1970.) <br /> <br />c. <br /> <br />HEC Technical Paper No. 20, Computer Determination <br />Bridges (1970) by Bill S. Eichert and John Peters. <br />the Journal of the Hydraulics Division, ASCE, Vol. <br />July.) <br /> <br />of Flow Through <br />(Published in <br />96, No. HY7, <br /> <br />d. HEC Training Document No.5, Floodway Determination Using Computer <br />Program HEC-2, May 1974. <br /> <br />e. REC Training Document No.6, Computation of Water Surface Profiles <br />Through Bridges Using HEC-2, June 1974. <br /> <br />f. "Water Surface Profiles," IHD Volume 6, The Hydrologic Engineering <br />Center, 1975. <br /> <br />10. REFERENCES <br /> <br />a. Eichert, Bill S., "Critical Water Surface by Minimum Specific <br />Energy Using the Parabolic Method," Hydrologic Engineering Center, <br />U.S. Army Corps of Engineers. <br /> <br />b. Koch-Carstanjen, "Von der Bewegung des Wassers und Den Dabei <br />Auftretenden Kraften, Hydrodynamik," Berlin, 1926. A partial <br />translation appears in Appendix I, "Report on Engineering Aspects <br />of Flood of March 1938," -U.S. Engineer Office, Los Angeles, May <br />1939. <br /> <br />c. "Hydraulic Design of Spillways," Engineering Manual 1110-2-1603, <br />U.S. Army Corps of Engineers, 31 March 1965, Plate 33. <br /> <br />d. "Backwater Curves in River Channels," Engineering Manual 1110-2-1409, <br />U.S. Army Corps of Engineers, 7 December 1959. <br /> <br />e. "Hydraulic Design of Reservoir Outlet Structures," Engineering <br />Manual 1110-2-1602, U.S. Army Corps of Engineers, 1 August 1963. <br /> <br />f. "Evaluating Friction Loss in the Standard Step Method," William <br />A. Thomas and John C. Peters. <br /> <br />17 <br />