FLOOD07007 - Laserfiche WebLink

Home Browse Search

IJ (c) the stages for the rating curve, SQ card (12), (d) the flows (QS card) corresponding to stages for the rating curve (13), (e) the stages for damage data, SO card (14), (f) the damage data (DG card) corresponding to the stages (15); if stage-damage data were input for other damage categories, that output would follow. Note that the type of card ending the input data is noted (16), in this case an EJ card. . 25. DAMAGE RESULTS The damage by category is shown for each input frequency value, or stage or flow value if only damage data are to be computed (17). These data are output for the study year, base year, five decade years and, if unique, the end of period year and the input data years. These data may be suppressed by adding 2 to the print suppression code for JDGPR on the PP card. Expected annual damage values are output, if computed, along with the damage data (18). These values may be suppressed by adding 4 to the print suppression code for JDGPR on the PP card. 26. PERIOD OF ANALYSIS RESULTS A summary table (19) of the results is output showing key output data and the expected annual damage values for the study year, base year, decade years and end-of-period year. Also equivalent annual damage has been computed by discounting each year back to the beginning of the base year and then amortizing over the period of analysis. Note that the economic results are end-of-year values; therefore, the input data should also repre- sent en~-of-year conditions. 27. END-MESSAGE The END OF RUN message (20) indicates that the run terminated normally, that is, no execution errors found by the computer on the program. But the message does not mean that there are no errors in the output caused by incorrect input. Therefore, carefully check all output for correctness. 18