Laserfiche WebLink
<br />Damage Reach Cards, DR, DT, SE, LC. A set of damage reach cards is <br /> <br /> <br />required for ~ damage reach in the analysis run. <br /> <br />Damage Reach Card, DR. A required card needed to identify the <br /> <br /> <br />damage reach code in the data bank and to give the corresponding <br /> <br /> <br />reference flood elevation, the starting aggregation elevation, the <br /> <br />aggregation interval and any policy, flood proofing or evacuation <br /> <br />elevations that are necessary. The DR card is also used to create <br /> <br />a new damage reach from the aggregation of the current damage reach <br /> <br /> <br />and to modify land use densities and other input values. <br /> <br />Damage Reach Title Card, DT. A required card needed after the DR <br />card to describe the current damage reach. <br /> <br />Single Flood Event Card, SE. An optional card necessary only for <br /> <br /> <br />single flood event analysis. The card values represent the water <br /> <br /> <br />surface elevations at the damage reach index location which corre- <br /> <br />spond to the single flood events described on the ST card. <br /> <br />Change to Land Use Damage Card, LC. An optional card(s) used to <br />modify damage data for a specified land use(s) within the damage reach. <br /> <br />Ending Card, END. A required card that signals the end of the input <br />data. <br /> <br />I <br />~ <br /> <br />Output Display <br /> <br />The description of the output is accompanied by a sample printout, Exhibit <br /> <br /> <br />4-1. The output does not include all land use category damage functions or <br /> <br /> <br />damage reach aggregated damage functions which would normally be printed. <br /> <br /> <br />The numbers in parenthesis in the text refer to a specific line (or series <br /> <br /> <br />of lines) that is numbered on the sample output. <br /> <br />4-33 <br />