|
<br />9. SUPPLEMENTAL MATERIAL
<br />
<br />The following supporting publications and illustrations are available from
<br />HEC for computer program HEC-2, Water Surface Profiles:
<br />
<br />a, HEC-2, Water Surface Profiles, Programmers Manual, 1976,
<br />
<br />b, HEC Technical Paper No. 11, Survey of Programs for Water Surface
<br />Profiles (1968) by Bill S, Eichert, (Published in the Journal of
<br />the Hydraulics Division, ASCE, Vol, 96, No, HY 2, February 1970,)
<br />
<br />c,
<br />
<br />HEC Technical Paper No, 20, Computer Determination
<br />Bridges (1970) by Bill S, Eichert and John Peters,
<br />the Journal of the Hydraulics Division, ASCE, Vol,
<br />July,)
<br />
<br />of Flow Through
<br />(Published in
<br />96, No, HY7,
<br />
<br />d. HEC Training Document No.5, Floodway Determination Using Computer
<br />Program HEC-2, May 1974.
<br />
<br />e, REC Training Document No, 6, Computation of Water Surface Profiles
<br />Through Bridges Using HEC-2, June 1974.
<br />
<br />f. "Water Surface Profiles," IHD Volume 6, The Hydrologic Engineering
<br />Center, 1975,
<br />
<br />10. REFERENCES
<br />
<br />a. Eichert, Bill S" "Critical Water Surface by Minimum Specific
<br />Energy Using the Parabolic Method," Hydrologic Engineering Center,
<br />U.S, Army Corps of Engineers.
<br />
<br />b, Koch-Carstanjen, "Von der Bewegung des Wassers und Den Dabei
<br />Auftretenden Kraften, Hydrodynamik," Berlin, 1926. A partial
<br />translation appears in Appendix I, "Report on Engineering Aspects
<br />of Flood of March 1938," .U.S, Engineer Office, Los Angeles, May
<br />1939,
<br />
<br />c, "Hydraulic Design of Spillways," Engineering Manual 1110-2-1603,
<br />U,S. Army Corps of Engineers, 31 March 1965, Plate 33.
<br />
<br />d, "Backwater Curves in River Channels," Engineering Manual 1110-2-1409,
<br />U,S. Army Corps of Engineers, 7 December 1959,
<br />
<br />e. "Hydraulic Design of Reservoir Outlet Structures," Engineering
<br />Manual 1110-2-1602, U.S, Army Corps of Engineers, 1 August 1963,
<br />
<br />f, "Evaluating Friction Loss in the Standard Step Method," William
<br />A, Thomas and John C. Peters,
<br />
<br />17
<br />
|