Laserfiche WebLink
<br />Chapter 4 Example Application <br /> <br />4. Once all the data are entered for this section, press the Apply Data <br />button. <br /> <br />5. Plot the cross section to inspect the data. <br /> <br /> <br />Figure 4.6 Cross Section Editor with river mile 0.2 of Butte Creek <br /> <br />There are two other cross sections that need to be developed for the Butte <br />Creek tributary. These two cross sections will be developed by duplicating <br />the cross section that you just entered, and then adjusting the elevations and <br />stationing. The necessary adjustments are listed in Table 4.2. Perform the <br />cross section adjustments in the order that they are listed in the table. Make <br />sure to change the description of each cross section and press the Apply Data <br />button after editing is complete. <br /> <br />4-8 <br />