Laserfiche WebLink
<br />Chapter 3 Workinx With HEC-RAS - An Overview <br /> <br />Tabular output is available in two different formats. The first type of tabular <br />output provides detailed hydraulic results at a specific cross section location <br />(cross section table). An example of this type of tabular output is shown in <br />Figure 3.11. <br /> <br /> <br />Figure 3.11 Tabular Cross Section Output <br /> <br />The second type of tabular output shows a limited number of hydraulic <br />variables for several cross sections and multiple profiles. An example of this <br />type oftabuIar output is shown in Figure 3.12. There are several standard <br />tables that are pre-defined and provided to the user under the Tables menu <br />from the profile output tables. Users can also define their own tables by <br />specifying what variables they would like to have in a table. User specified <br />table headings can be saved and then selected later as one of the standard <br />tables available to the project <br /> <br />Tabular output can be sent directly to the printer or passed through the <br />clipboard in the same manner as the graphical output described previously. <br />This option is also available under the File menu on each of the table forms. <br /> <br />3-13 <br />