FLOOD03190 - Laserfiche WebLink

Home Browse Search

. . . SCOPE OF WORK COMMUNITY OF WELDONA MORGAN COUNTY, COLORADO Topographic Mapping December 2, 1997 Contractor For the purposes of this project, the mapping Contractor shall be the firm of Landmark Mapping, Inc. The Colorado Water Conservation Board (CWCB) is the project owner. Summary of Requested Work The Contractor shall obtain aerial photography and/or perform field surveys in order to obtain topographic information in support of a flood hazard mitigation feasibility study. The engineering firm ofWRC Engineering, Inc. will be performing the engineering analyses and will make use of the mapping information provided by the mapping Contractor. Authoritv According to Section 37-60-106(1)(c) of the Colorado Revised Statutes, the Colorado Water Conservation Board has the power and duty: "... to devise and formulate methods, means and plans for bringing about the greater utilization of the waters of the state and the prevention of flood damages therefrom. . ." Proiect Location The project area is located in the community of Weldon a in Morgan County, Colorado. Proiect Tasks The mapping Contractor shall be responsible for the following tasks and items: . Obtain aerial photography sufficient to produce 2 foot contour topographic mapping for the areas shown in Attachment A (project area 1). Obtain aerial photography to produce 2 foot contour mapping for the area shown in Attachment B (project area 2). Obtain sufficient data to define edges of all roadways within project areas, houses and other buildings, fences, and trees (planimetrics). . Plot 2 foot contours on 24" by 36" reproducible vellum or mylar sheets. Plot scale should be 1" = 200'. Locations of streets, houses, trees, fences, and other major features should be marked and labeled on the plotted sheets. Contour accuracy should be plus or minus one half of the contour interval. A border and a blank title block should be included on the sheets, along with the map scale and a north arrow. I