Laserfiche WebLink
<br />(Optional) Correction Factor For Final Infiltration Rate <br />(Optional) Correction Factor For Depresslon Loss Storage <br />NOTE: Repeat "Record Set B1" for each new hyetograph <br />-________ ____________t~2_~~p_te"_~~~__~t~tty!_JJ_}y~_to~_~_~~_________________ ___________ _____________ _________ <br />(End of Record Set Bl) <br /> <br />DATA <br />FIELD <br /> <br />DESCRIPTION OF INPUT RECORD AND DATA <br /> <br />1B <br />19 <br /> <br />COLUMN <br />NUMBER <br /> <br />VARIABLE <br />NAME <br /> <br />INPUT <br />FORHAT <br /> <br />73-76 <br />77-80 <br /> <br />CFNINF <br />CRET <br /> <br />F4.2 <br />F4.2 <br /> <br /> Record Set B2: One-Hour Rainfall Depth Inout (5) <br /> NOTE: If you will use Print Options 7, 8 or g; namely, <br /> write an output file for eventual routing using <br /> UDSWM2-PC, then enter only one deslgn storm <br /> hourly depth for each run. <br />1 Storm Number (right justify) 1-2 NIDI 12 <br />2 Storm Identification (date or return period) 3-12 NDTl1,2,3 2A3,A4 <br />3 Return Period (Use 002, 005, 010, 050, or 100) 13-15 IRP 13 <br />4 - I-Hour Design Rainfall Depth (inches) 16-20 ROH F5.2 <br />5 Blank Field of 44 Columns 21-64 -- -- <br />6 Optional: Correction Factor For Initial (or Uniform) -- <br /> 65-68 CINFL F4.2 <br /> Infiltration Rate <br />7 Optiona 1: Correction Factor For Horton's Infiltration 69-72 CDECAY F4.2 <br /> Decay Exponent <br />8 Optional: Correction Factor For Final Infiltration Rate 73-76 CFNINF F4.2 <br />9 Optional: Correction Factor For Depresslon Loss Storage 77-80 CRET F4.2 <br /> <br />NOTE: Repeat "Record Set B2" for each new I-hour design <br />rainfall. Llmit of gg hourly design rainfall <br />depths. Also, see "NOTE" above. <br />--------- -----------(E~d-~f-R~~~~d-S~t-B2)----------------------------------- ----------- ------------- --------- <br /> <br />Enter an Empty (Blank) Record Here to Mark the End of <br />Rainfall Input. <br /> <br />1 <br />2 <br /> <br />Record - C: Print Options. Rainstorm Selection. Basin <br />Identification or Comment. <br />Leave Blank (Reserved to signal 'End of Job') <br />Print/Output Option: <br />. Enter: 0 - Print: Basin Parameters, Unit <br />Hydrograph, Hyetograph, Storm Hydrograph, <br />Peak Flow, and Runoff Volume. <br />1 - Print: Basin Parameters, Unit <br />Hydrograph, Hyetograph, Tabular Calculation <br />of Excess Precipitation, Storm Hydrograph, <br />Peak Flow, and Runoff Volume. <br />2 - Print: Basin Parameters, Unit <br />Hydrograph. Peak Flows, and Runoff <br />Volume. (No storm hydrograph) <br />3 - Print: Same as Option "2" above. <br />Write all peak flows to dlsk file <br /> <br />" <br /> <br />I <br />2 <br /> <br />END <br />NSW <br /> <br />Al <br />11 <br />