Laserfiche WebLink
<br />and, <br /> <br />These plans represent the AS-CONSTRUCTED conditions of <br />dam to the best of our knowledge <br />and judgement, based in part on information furnished by <br />others as of the _____ day of ,19___. <br /> <br />(Engineer's printed name) <br /> <br />(Signature) <br /> <br />5.A.(2)(c) Drawings filed with the State Engineer shall be <br />originals, or a high quality reproducible archival copy of the <br />original, and shall be prepared in an appropriate scale so details are <br />legible, drawn with permanent ink on high quality Mylar or equivalent, <br />submitted in an overall size of 24 inches high and 36 inches wide. <br /> <br />5.A.(2)(d) Drawings shall have a minimum margin of two inches <br />on the left and 1/2 inch on the right, top, and bottom. <br /> <br />5.A.(2)(e) Minimum letter size shall be 1/8 inch or 100 Leroy <br />template or equivalent. <br /> <br />5.A.(2)(f) All drawing sheets shall have bar scales in order to <br />allow scaling of reduced drawings. <br /> <br />5.A.(2)(g) All <br />right-hand corner a 1/2- <br />number. <br /> <br />drawing sheets shall have in the lower <br />by 3-inch space for the State Engineer's file <br /> <br />5.A.(2)(h) Each sheet shall have the responsible engineer's <br />seal and signature. <br /> <br />5.A.(2)(i) Each sheet shall be numbered sequentially with the <br />first sheet being sheet number one in conjunction with the total <br />numbered sheets; e.g" 1 of 6. <br /> <br />5.A.(3) Construction Specifications which shall meet the <br />following requirements: <br /> <br />5.A.(3)(a) The front cover of the specifications shall show the <br />title or name of the dam (identical to the title on the plans), the <br />county, Water Division and former Water District, in which the dam is <br />locat~d. The first page behind the front cover shall show the name of <br />the dam (identical to the name on the plans), the county, Water <br />Division and former Water District in which the dam is located, and <br />the engineer's seal and signature, and the State Engineer's approval <br />statement as follows: <br /> <br />- 11 - <br />