Laserfiche WebLink
<br />PEAKFQ <br /> <br />example: ascii input <br /> <br />PEAKFQ <br /> <br />PEAKFQ <br /> <br />The Lowest historic peak and Highest systematic peak fields are informational and <br />cannot be modified. These values are determined from the peak record for the station. <br /> <br />By default, urban and (or) regulated peaks are not (NO) included in the computations. <br />These peaks are indicated by a "6" or "e" in the qualification code field. If an "I" <br />record is present, this field will default to YES if the Station option field contains a <br />"K". <br /> <br />The Generalized skew is, by default, based on the station latitude and longitude using <br />the generalized skew map accompanying the Bulletin I 7B guidelines. If an ''I'' record <br />is present and the generalized skew field is non-blank, that vavlue will be provided as <br />the default. <br /> <br />The Std error of gen. skew field is, by default. 0.55, corresponding to the standard <br />error of the generalized skew map accompanying the Bulletin 17B Guidelines. If an <br />"I" record is present and the the standard error of generalized skew field is non-blank, <br />that value will be provided as the default. <br /> <br />For the first set of peaks in the input file, the Generalized skew was provided on an "I" <br />record. All other fields contain the standard default values. After the computation <br />options have been accepted, the program will do the calculations and report when they <br />are completed.Processing will then continue to the next set of peaks. <br /> <br />Modify (AM) <br />Modify computation options as needed. (Station 03606500 <br /> <br />PEAKFQ 2. <br /> <br />Begin year [..mlll <br />End year [ 1973] <br />length of historic period [ 0,0] <br />Skew comp option [WTD] <br />lo-outlier threshold [ 0.0] <br />Gage base discharge [0.0] <br />Latitude [36.0386] <br />Longitude [88.2283] <br /> <br />Hi-outlier threshold [ 0.0] <br />Lowest historic peak (18500.0) <br />Highest systematic peak (17000.0) <br />Allow urban/reg peaks [NO ] <br /> <br />(Change to override Bull 17b map skew) <br />Generalized skew [-0.5] <br />5td error of gen. skew [ 0.55] <br /> <br />STATU <br />Data from Watstore file test4.inp <br />Output to file test4.out <br /> <br />INSTRUCT <br /> <br />Enter data in highlighted field(s). <br />Use carriage return or arrow keys to enter data and move between fields. <br />Use -Accept- command to go to next screen when done entering data. <br /> <br />Help:~ Accept:~ Limits:~ Status:~ Intrpt:~ Quiet:~ Cmhlp Oops <br /> <br />66 <br /> <br />DRAFT -1130/98 <br />