Laserfiche WebLink
<br />PEAKFQ <br /> <br />example: ascii input <br /> <br />PEAKFQ <br /> <br />Opening screen (screen with selection of Start option not shown) <br />Start <br /> <br />After the Input source has been specified and any desired Output or Modify entries <br />have been made, select Start to perform the analysis. <br /> <br />If the plot style Graphics or Both was specified on the Output /Options screen, the <br />screen for selecting the output graphics device will be displayed. For some output <br />graphics devices, the name of a file for graphical output may need to be entered. <br /> <br />In the example. the Laser option generates a PostScript file that can be printed on a <br />laser printer or other device that recognizes the PostScript language. <br /> <br />Start (5) <br /> <br />PEAKFQ 2. <br /> <br />Select output device: <br /> <br />Screen <br />IIlID <br />Plotter <br />Meta <br /> <br />- display screen <br />- printer or dot matrix printer <br />- pen plotter <br />- file <br /> <br />STATU <br />Data from Watstore file test4.inp <br />Output to file test4.out <br /> <br />INSTRUCT <br /> <br />Select an option using arrow keys <br />then confirm selection with the F2 key~ or <br />Type the first letter of an option. <br /> <br />Help:~ Accept:~ Status:~ Quiet:im Cmhlp <br /> <br />Output (O) <br /> <br />PEAKFQ 2. <br /> <br />Name of file for graphical output? <br /> <br />[wwallmil <br /> <br />STATU <br />Data from Watstore file test4.inp <br /> <br />Output to file test4.out <br /> <br />INSTRUCT <br /> <br />Help:WD Accept:~ Prev:~ Limits:~ StatuB;~ Quiet:~ Cmhlp Oops <br /> <br />Enter data in highlighted fleld(s). <br />Use carriage return or arrow keys to enter data and move between fields. <br />Use #Accept~ command to go to next screen when done entering data. <br /> <br />PEAKFQ <br /> <br />64 <br /> <br />DRAFT -1/30/98 <br />