Laserfiche WebLink
<br />PEAKFQ <br /> <br />example: wdm input <br /> <br />PEAKFQ <br /> <br />Modify (screen with selection of Base option not shown) <br />Modify I Base <br /> <br />Select Base to adjust the lower limit for measurable flood discharge, this is usedin conjunction <br />with the "less than" qualification code. A value greater than 0.0 will supersede the gage base <br />discharge inferred from any "less than" qualification codes. The first column in the table in <br />informational and cannot he modified. In the example, no values were entered. <br /> <br />Base (MB) <br /> <br />PEAKFQ 2. <br /> <br />Station <br />1.0. <br /> <br />Base <br />gage <br />discharge <br /> <br />01373500 <br />06600500 <br />01614000 <br />11274500 <br />03339500 <br /> <br />;:-. <br />0,0 <br />0,0 <br />0.0 <br />0,0 <br /> <br />-STATU <br />Data from WOM file test.wdm <br />5 data sets in the buffer <br />Output to file bull17b.out <br /> <br />INSTRUCT <br /> <br />Enter data in highlighted field(s). <br />Use carriage return or arrow keys to enter data and move between fields. <br />Use PAccept' command to go to next screen when done entering data. <br /> <br />Help:;D Accept:~ Limits:~ 'Status:~ Quiet:~ Cmhlp Oops Window <br /> <br />Modify (screen with selection of Return option not shown) <br /> <br />Opening Screen (screen with selection of Start option not shown) <br />Start <br /> <br />After the Input source has been specified and any desired Output or Modify entries have been <br />made, select Start to perform the analysis. <br /> <br />If the plot style Graphics or Both was specified on the Output /Options screen, the screen for <br />selecting the output graphics device will be displayed. <br /> <br />Start (5) <br /> <br />PEAKFQ 2. <br /> <br />Select output device: <br /> <br />I!I!Im! <br />Laser <br />Plotter <br />Meta <br /> <br />- display screen <br />- printer or dot matrix printer <br />- pen plotter <br />- file <br /> <br />-STATU <br />Data from WOM file test.wdm <br />5 data sets in the buffer <br />Output to file bull17b_2.out <br /> <br />INSTRUCT <br /> <br />Select an option using arrow keys <br />then confirm selection with the F2 key, or <br />Type the first letter of an option. <br /> <br />Help:~ Accept:~ Status:~ Quiet:~ Cmhlp <br /> <br />PEAKFQ <br /> <br />52 <br /> <br />DRAFT. 1/30/98 <br />