Laserfiche WebLink
<br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br /> <br />SECTION IV <br /> <br />SEEDING OPERATIONS <br /> <br />A. Objectives <br /> <br />The objective of cloud seeding in the Muddy Road area <br />continues to be modification of convective storms with the aim of <br />increasing rainfall. When there is a potential for hailstorms, <br />primary emphasis is placed on hail suppression. <br /> <br />A secondary objective of the program is to collect and <br />archive storm and other meteorological data during the seeding <br />season. This data, along with rainfall and hail crop insurance <br />data, will be used in later analysis and seeding evaluation studies. <br /> <br />B. Seeding Methods <br /> <br />1. Cloud top seeding <br />The application of silver iodide pyrotechnic seed- <br />ing material at or near the top of newly developed peripherical <br />storm-turrets was the principal method used for treating the con- <br />vective storms. --With this technique the nuclei generating flares <br />can be very selectively and rapidly dropped into the new growth of <br />threatening storms. Night-time storm coverage continued to be a <br />part of the cloud-top seeding aircraft tasks. The two turbo-charged <br />cloud-top seeder aircraft and crews were again based at Lakin so <br />as to be close to the radar operations center and could utilize the <br />paved-lighted runway. <br />2. Cloud-base Seeding <br />Although cloud~op seeding was the main technique <br />used in Muddy Road V, the third aircraft, a Piper Comanche 250, <br /> <br />7 <br />