Laserfiche WebLink
StateMod GUI Documentation <br />4.1 Data... Baseflow Coefficients <br />The Data...Baseflow Coefficients menu displays a data window for StateMod baseflow coefficient data <br />from the StateMod .rib file. <br />-LI <br />Help Close <br />Proration Factor: <br />0.033 <br />Baseflow Time Series.. <br />~ Stream <br />Term IIpstream <br />Term Gage Gain Term <br />ATeight Gain Term <br />Gage ID <br />1 1.0 08245000 <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />9 <br />10 <br />D ata B a sef I owC o eff i c i e n is <br />Baseflow Coefficients Window <br />This information is used to estimate flow at locations where a gage does not exist (e.g., at high points in <br />headwater basins). The available baseflow nodes are shown in the list on the left side of the window. <br />When a node is selected, the spreadsheet is filled with the coefficients for the node. Baseflow coefficient <br />information is not trivial to specify and should be done carefully. See the StateMod model documentation <br />and the Makenet DMI Utility documentation for more information. <br />StateMod GUI - 11 <br />