Laserfiche WebLink
u 1~ ~ <br />~. ~ C`J <br />`, <br />~._. <br />criterion and mass balance error thresholds will be defined and discussed with the State prior <br />to implementing the numerical model. <br />Deliverables: <br />Task 48.2 Model Configuration Report <br />• Apre-development report will be developed that describes the model purpose, model <br />. development, conceptual flow model, description of model inputs, calibration and results. It <br />is anticipated that the main report (without appendices) will be up to 75 pages in length. The. <br />report is anticipated to include the following sections. Note only those sections shown in Bold <br />Italics are expected to be incomplete or missing. for the pre-development model. Also some <br />appendices are expected to be Phase 1, 2 or 3 memoranda, while others are expected to be <br />developed in this Task (Task 48), while others are expected to be provided by other SPDSS <br />contractors:' <br />1.0 Executive Summary <br />2.0 Introduction <br />2.1 Basin Description <br />2.2 Water Resources Developments <br />2.3 Study Period <br />2.4 Historical Water Rights Administration <br />2.5 Purpose and Objectives <br />3.0 Model Development <br />3.1 Prior Ground Water Modeling <br />3.2 SPDSS Ground Water Modeling Approach <br />3.3 File Directory Convention <br />3.4 File Naming Convention <br />3.5 Data Centered Ground Water Modeling Approach <br />3.6 Conceptual Model <br />4.0 Input Description <br />4.1 Model Grid <br />4.2 Ground Surface <br />4.3 Stratigraphy <br />4.4 Layer Types <br />4.5 Initial Heads <br />4.6 Boundary Conditions <br />4.7 Aquifer Test Data <br />4.8 Parameter Zones <br />4.9 Horizontal Hydraulic Conductivity <br />4.11 Specific Yield ~~ <br />4.12 Pumping <br />SPDSS Groundwater SOW, Phase 3 16 <br />